PW502模拟量通信模块 传感器输出的模拟信号转换为数字信号

PW502模拟量通信模块 传感器输出的模拟信号转换为数字信号

PLC以太网通信是基于传统的Ethernet通信机制，使用以太网和TCP/IP协议作为通信基础，在任何场合下都提供对TCP/IP通信的绝对支持。为为

能够满足自动化中的实时要求，基于PLC以太网层的优化实时通信通道，减少了通信上占用的时间，提高了自动化数据刷新方面的性能。

随着远程在工业设备上的应用，如何能节省成本，让plc以太网通讯模块连接更多的设备从而达到监控和控制的作用。用一台PLC远程通讯模块连

接多台以太网PLC，HiNet智能网关最多连接254台以太网接口的PLC或者触摸屏。

隔离式宽范围电源板

PW502是隔离式宽范围1 6.8V-137.5V输入电压电源板，支持4 x DC输出。

PW502隔离电源板设计用于LEX elO主板。

●模块封装:1/2、1/4砖

●输入:TB或DC插孔或晶片型到M12电缆

●输出:4端C J12V输出， elO

●保护措施:SCP、OCP、OVP 

PW502模拟量通信模块 传感器输出的模拟信号转换为数字信号

PLC Ethernet communication is based on the traditional Ethernet communication mechanism, the use of Ethernet and TCP/IP protocol as the basis for communication, in any case to provide absolute support for TCP/IP communication. A surname

It can meet the real-time requirements in automation, optimize the real-time communication channel based on PLC Ethernet layer, reduce the time occupied on communication, and improve the performance of automatic data refresh.

With the application of remote in industrial equipment, how to save costs, so that plc Ethernet communication modules connect more equipment to achieve the role of monitoring and control. Connected by a PLC remote communication module

Connect to multiple Ethernet PLCS, HiNet intelligent gateway can connect to up to 254 Ethernet PLCS or touch screens.

Isolated wide range power supply board

The PW502 is an isolated wide range 1 6.8V-137.5V input voltage power supply board that supports 4 x DC output.

The PW502 isolated power supply board is designed for use on LEX elO boards.

● Module package :1/2, 1/4 brick

● Input :TB or DC jack or chip type to M12 cable

● Output :4 end CJ12V output, elO

● Protection measures :SCP, OCP, OVP