AFV10D-S41201 S2横河yokogawa模拟量输入卡工控仪器

AFV10D-S41201 S2横河yokogawa模拟量输入卡工控仪器

AFV10D-S41201 S2横河yokogawa模拟量输入卡工控仪器

横河电机公司于9月18日发布CENTUM VP集散控制系统的增强版本CENTUMTM VP R6.7.1。CENTUM VP是OpreXTM品牌下控制和系统系列解决方案的产品。

横河电机通过引入统一的报警和条件服务器(UACS)增强CENTUM VP R6.7.1的功能，该服务器可以大规模系统的运行。UACS根据标准规则整合工厂设备发出的报警，把重要的报警提示给操作员引起注意，从而使操作人员能够集中精力监控过程以整个工厂的效率。

开发背景

近年来，制造商不断寻求整合其工厂控制室和控制系统的方法，以求减少操作员的数量的操作。这就要求每个操作员能够大范围的活动并处理不断增加的报警，同时根据指示的过程异常类型确定其操作的优先。但是，如果大量的报警连续而地显示，其中重要的报警可能会被忽视，导致响应延迟为严重事故的发生埋下隐。为此，横河开发了UACS，它能够在大型系统中整合及管理报警，重要的报警引起操作员的注意。

功能

UACS基于客户机-服务器架构*运行，集中管理显示在操作员人机界面站(HIS)上的报警。UACS适用于大型工厂的控制系统，包括仪表系统、可编程逻辑控制器(PLC)、电气系统和其他组件。服务器和控制功能被设计为在冗余配置下运行。因此，如果操作服务器出现异常，操作将平稳自动切换到备用服务器。

AFV10D-S41201 S2横河yokogawa模拟量输入卡工控仪器

Yokogawa Electric Corporation has released an enhanced version of the CENTUM VP Distributed control system, CENTUMTM VP R6.7.1, on September 18. The CENTUM VP is part of the OpreXTM family of control and system solutions.

Yokogawa has enhanced CENTUM VP R6.7.1's capabilities by introducing a unified alarm and condition server (UACS) that can operate large-scale systems. UACS integrates alarms issued by plant equipment according to standard rules, bringing important alarms to the attention of the operator, so that the operator can focus on monitoring the process and overall plant efficiency.

Development background

In recent years, manufacturers have sought ways to integrate their plant control rooms and control systems in order to reduce the number of operators involved. This requires each operator to be able to operate over a wide range of activities and handle the increasing number of alarms while prioritizing their operations based on the type of process exception indicated. However, if a large number of alarms are continuously displayed, important alarms may be ignored, resulting in a delay in response to the occurrence of serious accidents. To this end, Yokogawa developed UACS, which can integrate and manage alarms in large systems and bring important alarms to the attention of operators.

Feature

UACS operates on a client-server architecture * and centrally manages the alarms displayed on the operator Human Machine Interface station (HIS). UACS is suitable for large plant control systems, including instrumentation systems, programmable logic controllers (PLCS), electrical systems and other components. The server and control functions are designed to operate in a redundant configuration. Therefore, if the operation server is abnormal, the operation is smoothly and automatically switched to the standby server.