YOKOGAWA横河CP451-10处理器电机模块

YOKOGAWA横河CP451-10处理器电机模块

YOKOGAWA横河CP451-10处理器电机模块

制造商 ： 横河电机

产品编号 ： CP451-51

产品类型 ： CP451 - 处理器模块（适用于 AFV300/AFV400）

本产品是 CP451-11 处理器模块的替代品

-5 - 标准型，无防爆保护

1 - 带 ISA 标准 G3 选项

重量 ： 1 公斤

装运重量： 2 公斤

Yokogawa横河 CP451-10 CPU 处理器模块。由功能块和输入/输出组成的小型控制组将在控制图中进行描述。CP451-10 CPU 处理器模块通过将过程设备控制统一为控制图，可以简化工程和维护工作。CP451-10 CPU 处理器模块监控整个工厂或每个过程也可以指定为控制图，而不是指定不同设备之间的单个过程单元或功能。

CP451-10 CPU 处理器模块下面描述控制图的特征：

连接I/O 和控制块 通过在I/O 和功能块之间或功能块之间连接一条线，可以可视化数据流定义。

1、定义控制块实现的顺序 可以在控制图中描述的几个功能块中确定实现优先级或执行顺序。

2、调节控制和顺序控制的混合调节控制和顺序控制可以在控制图中混合。控制功能可根据工艺要求灵活配置。

3、控制图之间的自由信号流 属于不同控制图的功能块可以连接到另一个控制图。

YOKOGAWA横河CP451-10处理器电机模块

Manufacturer: Yokogawa Electric

Product Number: CP451-51

Product Type: CP451 - Processor module (for AFV300/AFV400)

This product is a replacement for the CP451-11 processor module

-5 - Standard type, no explosion protection

1 - G3 option with ISA standard

Weight: 1 kg

Shipping weight: 2 kg

Yokogawa CP451-10 CPU processor module. A small control group consisting of functional blocks and inputs/outputs will be described in the control chart. The CP451-10 CPU processor module simplifies engineering and maintenance by unifying process equipment control into a control chart. The CP451-10 CPU processor module monitors the entire plant or each process can also be specified as a control chart, rather than specifying individual process units or functions between different devices.

CP451-10 CPU Processor module The following describes the characteristics of the control chart:

Connecting I/O and control blocks You can visualize data flow definitions by connecting a line between I/O and function blocks or between function blocks.

1, Define the order of control block implementation You can determine the implementation priority or execution order in several functional blocks described in the control chart.

2, Mixing of adjustment control and sequence control Adjustment control and sequence control can be mixed in the control chart. The control function can be flexibly configured according to process requirements.

3, the free signal flow between the control charts belongs to the function block of different control charts can be connected to another control chart.