YOKOGAWA AIP830-111键盘备件控制模块

YOKOGAWA AIP830-111键盘备件控制模块

YOKOGAWA AIP830-111键盘备件控制模块

产品编号:AIP830-111/EIM

产品类型:操作键盘

型号:AIP830 =单回路操作用操作键盘

后缀代码:-1 =带模式选择开关

后缀代码:1 =操作确认键类型B

后缀代码:1 =始终为1

选项代码:/EIM =带英文说明手册

运输重量:5公斤

YOKOGAWA AIP830-111键盘备件控制模块

系统概述：

细纱工序是成纱的 后一道工序，是将粗纱进一步牵伸30～50倍并加捻，纺成具有一定特数、符合相关质量标准的细纱，供捻线、机织或针织使用。传统细纱机的牵伸原理与粗纱机基本相同，而卷绕和加捻则是由钢领和钢丝圈来完成的。环锭细纱机和传统粗纱机一样由一台电机传动，通过齿轮箱变换各机构需要的速度。

在环锭细纱机各组成部分中，牵伸系统是反映细纱机性能和影响纱线质量的 关键因素，而 的紧密纺纱技术通过对牵伸部分进行创造性改造，将牵伸区和集合区分离，在环锭纺罗拉牵伸与加捻之间叠加对纤维须条的气动凝聚或集聚技术，增加了须条的紧密度，毛羽减少约20％， 则提高约10％，同时，条干均匀度、机器效率等也有不同程度的提高，不仅可以降低加工 ，同时可以减少后加工工序。紧密纺的另一优点是与原细纱机完全一致，只多出一对集聚罗拉，在原环锭细纱机上也可进行改装，具有广阔的市场前景。       

紧密纺细纱机的控制系统较环锭细纱机复杂许多，首先是前后罗拉的严格同步，实现牵伸倍数和捻度的 控制， 高支数纱线的成纱质量；其次是通过取消钢领板的传动齿轮，采用 的伺服控制技术实现卷装的电子成形技术，从而实现了机械机构的简化、生产速度的提高、以及纱线支数和管纱成形的自动调节。

YOKOGAWA AIP830-111键盘备件控制模块

System overview:

The spinning process is the last process of yarn, which is to further draft the roving 30 to 50 times and twist it, and spin it into a certain number of fine yarn that meets the relevant quality standards for twisting, weaving or knitting. The drafting principle of the traditional spinning frame is basically the same as that of the roving frame, while the winding and twisting are completed by the steel collar and the wire ring. The ring spinning frame is driven by a motor like the traditional roving frame, and the speed required by each mechanism is changed through the gearbox.

In each component of ring spinning frame, the drafting system is the key factor reflecting the performance of the spinning frame and affecting the quality of the yarn, and the compact spinning technology through the creative transformation of the drafting part, the drafting zone and the collection zone are separated, and the pneumatic condensation or agglomeration technology of the fiber whisk is superadded between the ring spinning roller drafting and twisting, which increases the tightness of the whisk. Hair is reduced by about 20%, it is increased by about 10%, at the same time, dry uniformity, machine efficiency, etc., also have different degrees of improvement, not only can reduce the processing, but also reduce the post-processing process. Another advantage of compact spinning is that it is completely consistent with the original spinning frame, with only one more pair of gathering rollers, which can also be modified on the original ring spinning frame, and has a broad market prospect.