8440-1027 Woodward 电断路器同步

8440-1027 Woodward 电断路器同步

8440-1027 Woodward 电断路器同步

产品描述

型号 8440-1027 是 SPM-D21/PSVX 同步器模块集的一部分。SPM-D21/PSVX 型号具有多种特性和功能，包括发电机和市电断路器同步，以及负载控制和功率因数控制同步，以及发电机和市电保护。这些单元都设计有微处理器作为这些单元的操作基础。

8440-1027 配备自动频率匹配以及电压和相位匹配功能。该装置还安装了多种参数调整模式，分别标记为检查、运行、关闭和许可。

8440-1027 型号能够执行不同的操作，例如电源并联操作、隔离操作和死总线操作。主要的并行功能包括真RMS功率计算、实际功率控制，然后是软关断和功率因数控制。隔离功能是电压和频率控制。死总线功能处理发电机断路器和主断路器的关闭。

8440-1027型号的众多操作功能之一是多级密码保护，该型号还允许您调整语言，控制型号上的可调语言是德语或英语。重要的是要注意，您的控制器可以通过PC连接，如果通过PC连接，则通过PC连接或直接通过控制器操作和配置控制器。 正确运行控制器所需的电源为 24 Vdc（正负 <>%）。

8440-1027 Woodward 电断路器同步

Product description

Model 8440-1027 is part of the SPM-D21/PSVX synchronizer module set. The SPM-D21/PSVX model has a variety of features and functions, including generator and mains circuit breaker synchronization, as well as load control and power factor control synchronization, and generator and mains protection. These units are designed with microprocessors as the operating basis of these units.

The 8440-1027 is equipped with automatic frequency matching as well as voltage and phase matching. The device is also equipped with multiple parameter adjustment modes labeled Check, Run, Off, and permit.

The 8440-1027 model is capable of performing different operations, such as power parallel operation, isolation operation, and dead bus operation. The main parallel functions include true RMS power calculation, actual power control, then soft off and power factor control. The isolation function is voltage and frequency control. The dead bus function handles the shutdown of the generator circuit breaker and the main circuit breaker.

One of the many operational features of the model 8440-1027 is multi-level password protection, and the model also allows you to adjust the language, the tunable language on the control model is German or English. It is important to note that your controller can be connected via a PC, and if connected via a PC, operate and configure the controller via a PC or directly through the controller. The power required to run the controller correctly is 24 Vdc (plus or minus <>%).