TRICONEX 3501T 英维思数字安全系统模块

TRICONEX 3501T 英维思数字安全系统模块

TRICONEX 3501T 英维思数字安全系统模块

从调试模式切换到配置模式后，不允许从程序直接切换回调试模式。原因是所做的任何更改都可能对其他对象产生副作用，比如程序或显示器。仅在项目树显示中提供可见的副作用指示；

因此，在返回调试之前，需要切换到项目树。有必要切换到调试，例如：用户程序被加载在合理性检查后，对象被标记为加载箭头符号标签参数被纠正在运行的系统处理单个程序是被监控单个来自或现场对象的信号被调试（强制）。要加载现场总线现场设备的•DVP1参数。

从调试到配置模式的快速切换已经通过菜单项配置或工具栏在以下编辑器或列表显示：FBD程序LD程序IL程序ST程序SFC程序硬件结构（系统结构和站审查）变量列表标签列表。

模式的改变总是适用于整个自由职业者工程系统。因此，例如在编辑器中从调试切换到配置模式会导致如果随后移动到项目树，它也将处于配置模式。

TRICONEX 3501T 英维思数字安全系统模块

After switching from debug mode to configuration mode, it is not allowed to switch from a program directly back to debug mode. The reason is that any changes you make can have side effects on other objects, such as programs or monitors. Provide a visible indication of side effects only in the project tree display;

Therefore, before returning to debug, you need to switch to the project tree. It is necessary to switch to debugging, for example: the user program is loaded after the reasonableness check, the object is marked with the loading arrow symbol, the label parameter is corrected before the running system processes the individual program is monitored for a single signal from or the field object is debugged (forced). To load the •DVP1 parameters of the fieldbus field device.

A quick switch from debug to configuration mode has been shown via menu item configuration or toolbar in the following editor or list: FBD program LD program IL program ST Program SFC program Hardware structure (System Structure and station review) Variable list Tag list.

A change in pattern always applies to the entire freelancer engineering system. So, for example, switching from debug to configuration mode in the editor will result in it also being in configuration mode if it then moves to the project tree.