140DDO35300C 离散输入模块-32O固态

140DDO35300C 离散输入模块-32O固态

施耐德电气140 DDO 35300用于切换24伏直流电源负载。140 DDO 35300 DC输出24 VDC 4 x 8源模块与什么一起使用？它用于连接到0 V的共享输出。该模块化装置有32个输出，即八(8)组四(4)个输出点。逻辑电平为真高时，该模块的外部电源范围为19.2…30伏直流电。140 DDO 35300的功率分配为1.75 W + 0.4 V x总模块负载电流。Modicon 140 DDO 35300需要的母线电流为330 mA。它采用输出熔断保险丝故障检测和磁场功率损失。

施耐德电气140 DDO 35300的最大工作电压为19.2伏…30 VDC，而1 ms衰减脉冲的最大绝对电压为56 VDC。0.5 A时，导通状态下的压降为0.4 VDC。

Modicon 140 DDO 35300的4个点中每个点的最大负载电流为0.5 A，8个组中每个组的最大负载电流为4 A。模块的最大负载电流为16 A。140 DDO 35300输出模块的每个点的最大浪涌电流为5 mA @ 500 ms持续时间(每分钟不超过6)。它在30 VDC时具有0.4 mA的关断状态泄漏点。

优势

施耐德电气140 DDO 35300具有在500 VAC RMS下1分钟的组间隔离和在1780 VAC RMS下1分钟的组间隔离。这种Modicon量子单元具有内部瞬态电压抑制输出保护。

Modicon Quantum 140 DDO 35300具有LED指示灯，用于指示输出模块上的重要功能。当总线通信存在时，这些LED描述中的一些包括绿色激活。如果检测到模块外部的错误，会出现红色的F错误LED。对于32个输出中的每一个，当通道或点打开时，一个绿色指示灯LED将会建立。

如何使用140 DDO 35300

Modicon模块的型号、描述和颜色代码都可以在设备的正面上方看到。模块编号的正下方是LED显示区。保险丝控制位于前现场接线端子板内。现场接线板安装在保险丝控制前面的单元中。覆盖现场接线板的是一扇铰链式可移动门，门上贴有客户识别标签。

140DDO35300C 离散输入模块-32O固态

The Schneider Electric 140 DDO 35300 is used to switch 24 volt DC power supply loads. 140 DDO 35300 DC Output 24 VDC 4 x 8 Source module is used with what? It is used to connect to a shared output of 0 V. The modular device has 32 outputs, i.e., eight (8) groups of four (4) output points. When the logic level is really high, the external power supply range of the module is 19.2... 30 volts direct current. The power distribution of the 140 DDO 35300 is 1.75 W + 0.4 V x total module load current. The Modicon 140 DDO 35300 requires a bus current of 330 mA. It uses output for fusible fuse fault detection and magnetic field power loss.

The Schneider Electric 140 DDO 35300 has a maximum operating voltage of 19.2 volts... 30 VDC, while the maximum absolute voltage of a 1 ms attenuated pulse is 56 VDC. At 0.5 A, the voltage drop in the on-state is 0.4 VDC.

The Modicon 140 DDO 35300 has A maximum load current of 0.5 A at each of the four points and 4 A at each of the eight groups. The maximum load current of the module is 16 A. The maximum inrush current at each point of the 140 DDO 35300 output module is 5 mA @ 500 ms duration (not exceeding 6 per minute). It has an off state leak point of 0.4 mA at 30 VDC.

advantage

The Schneider Electric 140 DDO 35300 features 1-minute inter-group isolation at 500 VAC RMS and 1-minute inter-group isolation at 1780 VAC RMS. This Modicon quantum unit has an internal transient voltage suppression output protection.

The Modicon Quantum 140 DDO 35300 features LED indicators to indicate important functions on the output module. When bus communication is present, some of these LED descriptions include green activation. If an error outside the module is detected, a red F error LED appears. For each of the 32 outputs, a green indicator LED will be built when the channel or point is opened.

How to use the 140 DDO 35300

The model number, description, and color code of the Modicon module can be seen above the front of the device. Directly below the module number is the LED display area. The fuse control is located in the front field terminal board. The field patch panel is installed in the unit in front of the fuse control. Covering the site patch panel is a hinged removable door with a customer identification tag.