SCHNEIDER 施耐德  140DDI85300 模拟量输入模块

SCHNEIDER 施耐德  140DDI85300 模拟量输入模块

概述：

输入数量：该模块具有32个输入通道，可以接收32个离散信号。

输入电压和电流范围：该模块支持多种输入电压和电流范围，以适应不同的传感器或开关设备。具体的范围包括：

60V 1~5mA直流

48V 2~15mA直流

24V 6~30mA直流

12V 5~10mA直流

输入逻辑：该模块的正逻辑输入（即高电平表示信号有效）是通过散热片来实现的。

地址需求：该模块需要2个输入字来配置和访问。

输入电压限制：该模块的输入电压范围为10～60V。对于不同的电压状态，有不同的保证范围。

反应时间：该模块的反应时间（即从状态1到0或从状态0到1的时间）为4毫秒。

组之间的绝缘：该模块的各组之间具有700Vrms DC的绝缘强度，可以持续1分钟。

功耗：该模块的功耗为1W加上每个通电点的数量乘以0.62W。

就地信号：该模块提供32个LED指示灯，用于指示输入状态（1到32）。

SCHNEIDER 施耐德  140DDI85300 模拟量输入模块

Overview:

Number of inputs: The module has 32 input channels and can receive 32 discrete signals.

Input voltage and current ranges: The module supports a variety of input voltage and current ranges to suit different sensors or switchgear. Specific areas include:

60V 1~5mA DC

48V 2 to 15mA DC

24V 6~30mA DC

12V 5 to 10mA DC

Input logic: The positive logic input of the module (that is, the high level indicates that the signal is valid) is achieved through the heat sink.

Address requirements: The module requires 2 input words to configure and access.

Input voltage limit: The input voltage range of the module is 10 to 60V. For different voltage states, there are different guarantee ranges.

Reaction time: The module's reaction time (i.e. the time from state 1 to 0 or from state 0 to 1) is 4 milliseconds.

Insulation between groups: The module has an insulation strength of 700Vrms DC between the groups, which can last for 1 minute.

Power consumption: The power consumption of the module is 1W plus the number of power points per power point multiplied by 0.62W.

Local signal: The module provides 32 LED indicators to indicate input status (1 to 32).