140DAI34000 离散量输入模块 工业系统备件

140DAI34000 离散量输入模块 工业系统备件

140DAI34000 是一款离散量输入模块，主要用于工业系统中。离散量输入模块是工业自动化控制系统中的一个重要组成部分，用于接收来自各种开关、传感器等离散信号源的输入信号，并将这些信号转换成控制系统能够识别和处理的数字信号。

关于140DAI34000离散量输入模块的具体特点和参数，可以参考以下信息：

输入数量：该模块具有16个输入通道，可以同时接收16个离散信号。

输入电压：该模块的输入电压为24V交流（AC）。

通道组：每个通道都是独立的，可以分别配置和监控。

输入逻辑：该模块支持标准的逻辑电平输入，通常为高低电平信号。

输出电流：在不同频率下，输出电流有所不同，通常在47～53Hz时<=10.7mA，57～63Hz时<=12mA。

电压状态：在47～53Hz时，交流电压范围为18～30V；在57～63Hz时，交流电压范围为16～30V。

输入阻抗：在47～53Hz时，输入阻抗为3100 Ohm（电容式）；在57～63Hz时，输入阻抗为2600 Ohm（电容式）。

140DAI34000离散量输入模块广泛应用于各种工业自动化系统中，如生产线控制、机械设备监控、安全系统、能源管理等领域。它可以与PLC（可编程逻辑控制器）、DCS（分布式控制系统）等工业控制系统配合使用，实现对现场设备的远程监控和控制。

140DAI34000 离散量输入模块 工业系统备件

The 140DAI34000 is a discrete input module for use in industrial systems. Discrete input module is an important part of industrial automation control system, which is used to receive input signals from various discrete signal sources such as switches and sensors, and convert these signals into digital signals that can be recognized and processed by the control system.

For the specific features and parameters of the 140DAI34000 discrete input module, you can refer to the following information:

Number of inputs: The module has 16 input channels and can receive 16 discrete signals simultaneously.

Input voltage: The input voltage of this module is 24V AC.

Channel group: Each channel is independent and can be configured and monitored separately.

Input logic: This module supports standard logic level inputs, usually high and low level signals.

Output current: At different frequencies, the output current is different, usually <=10.7mA when 47 ~ 53Hz, <=12mA when 57 ~ 63Hz.

Voltage state: When 47 ~ 53Hz, the AC voltage range is 18 ~ 30V; At 57 ~ 63Hz, the AC voltage range is 16 ~ 30V.

Input impedance: When 47 ~ 53Hz, the input impedance is 3100 Ohm (capacitive); At 57 ~ 63Hz, the input impedance is 2600 Ohm (capacitive).

The 140DAI34000 discrete input module is widely used in various industrial automation systems, such as production line control, mechanical equipment monitoring, safety systems, energy management and other fields. It can be used with PLC (programmable logic controller), DCS (distributed control system) and other industrial control systems to achieve remote monitoring and control of field equipment.