施耐德SCHNEIDER140CRP93200 控制器模块

施耐德SCHNEIDER140CRP93200 控制器模块

施耐德SCHNEIDER140CRP93200 控制器模块

140CRA93200是中的远程I/O头双通道模块莫迪康量子系列。它设计用于与控制CPU模块安装在同一个背板上。该模块在两个模块之间双向传输数据，这两个模块是位于不同背板上的PCU和RIO drop模块。为了互连该RIO头模块，同轴电缆网络与至少一个其它RIO引入模块一起使用。

特征

Modicon 140CRA93200需要750 mA总线电流。典型功耗为3 W，该模块支持ma CRPs。该模块具有31个分支，可与Quantum 200系列、500系列、800系列或SY/MAX(任何组合)配合使用。有64个in字/滴，64个out字/滴。

该模块有2个端口/分支，最多32个端口(16个分支)，并要求在RIO分支处使用AS-P892-000 AS-J892-101/102或AS-J290-0X0。

Modicon 140CRA93200远程I/O头使用4个LED指示灯。这些指示器是就绪、通信、错误A和错误b。

模块前面的顶部是LED区域。LED区域下方是ROP同轴连接器区域，带有连接器A和连接器b。侧面是版本标签。前面有一个可拆卸的铰链门。

施耐德SCHNEIDER140CRP93200 控制器模块

The 140CRA93200 is the remote I/O head dual channel module in the Modecon Quantum series. It is designed to be mounted on the same backplane as the control CPU module. The module transmits data bidirectionally between two modules, which are PCU and RIO drop modules located on different backplanes. To interconnect this RIO head module, a coaxial cable network is used with at least one other RIO lead-in module.

trait

The Modicon 140CRA93200 requires 750 mA bus current. Typical power consumption is 3 W, and the module supports ma CRPs. The module has 31 branches and can be used with the Quantum 200 series, 500 Series, 800 Series or SY/MAX(any combination). There are 64 in words per drop, 64 out words per drop.

The module has 2 ports/branches, up to 32 ports (16 branches), and requires AS-P892-000 AS-J892-101/102 or AS-J290-0X0 at the RIO branch.

The Modicon 140CRA93200 remote I/O head uses 4 LED indicators. These indicators are ready, communication, error A, and error b.

At the top of the front of the module is the LED area. Below the LED area is the ROP coaxial connector area with connector A and Connector b. On the side is the version label. There is a detachable hinged door at the front.