MVI46-103M PROSOFT 主网络接口模块

MVI46-103M PROSOFT 主网络接口模块

M46-103M(“IEC 60870-5-103主通信模块”)允许罗克韦尔自动化SLC IV/O兼容处理器轻松与IEC接口60870-5-103从(受控单元)保护装置。兼容的设备包括继电器、断路器、分站通讯模块等串口通信设备。

M46-103M模块接口多达32个串行通信设备罗克韦尔自动化SLC处理器。两个通信端口模块作为控制设备(master)与被控制设备进行接口在他们自己的网络上。每个端口都可以单独配置。数据交换串行网络和罗克韦尔自动化处理器之间使用内部数据库包含在模块中，由控制器直接控制梯子逻辑。

—些通用规格包括:

根据国际认可的规范建造两个独立的主端口，完全可由用户配置多达32个会话(受控设备)每个会话最多5个扇区(单独的数据库)门每个扇区的单独数据库定义1000个控制站的命令SLC处理器可以直接向模块或模块发出控制命令控制设备(仁事件消息的传递

MVI46-103M PROSOFT 主网络接口模块

The M46-103M(" IEC 60870-5-103 Master Communication Module ") allows Rockwell Automation SLC IV/O compatible processors to easily interface with IEC 60870-5-103 slave (controlled unit) protection devices. Compatible devices include relays, circuit breakers, sub-station communication modules and other serial communication devices.

The M46-103M module interfaces with Rockwell Automation SLC processors for up to 32 serial communication devices. Two communication port modules act as control devices (Masters) to interface with controlled devices on their own networks. Each port can be configured individually. Data is exchanged between the serial network and Rockwell Automation processors using an internal database contained in the module, with ladder logic controlled directly by the controller.

- Some common specifications include:

Build two independent master ports according to internationally recognized specifications, fully configurable by the user up to 32 sessions (controlled devices) up to 5 sectors per session (separate database) Gate A separate database for each sector defines 1000 commands for control stations The SLC processor can issue control commands directly to the module or module Control devices (delivery of kernel event messages)