MOTOROLA MVME712/M  I/O 转换模块 内部调制解调器

MOTOROLA MVME712/M  I/O 转换模块 内部调制解调器

特点:

·四个25引脚多协议EIA-232-D串行端口

MVME712M是一款/O转换模块，适用于摩托罗拉的MPUVME模块、VME处理器模块、嵌入式控制器和单板计算机(SBC)系列处理器模块

.MME712M与MME147、MME1600、MVME162、MVME2600、MVME167、MVME2700、MVME177、MVME3600和MVME4600兼容。

MVME712M用作处理器模块及其外围设备之间的接口。本模块的目的是提供后面板行业标准连接器，简化外部客户电缆要求。

P2通配器组件将/O信号和接地从位于VMEmodule MPU连接处的机箱背板上的P2连接器发送到MVME712M。MVME712M将信号路由到四个串行端口，通过其前面板上的四个工业标准DB-25连接器实现。串行端口可通过MVME712M上的跳线配置用于EIA-232-D DTE或DCE。

MME712M前面板还有一个以太网端口、一个SCSI端口和一个打印机端口。此外，MVME712M将EIA-232-D端口2信号路由至内部调制驿调器。

MOTOROLA MVME712/M  I/O 转换模块 内部调制解调器

Features:

· Four 25-pin multi-protocol EIA-232-D serial ports

The MVME712M is a /O conversion module for MOTOROLA's MPUVME module, VME processor module, embedded controller and Single board Computer (SBC) family of processor modules

MME712M is compatible with MME147, MME1600, MVME162, MVME2600, MVME167, MVME2700, MVME177, MVME3600, and MVME4600.

The MVME712M serves as the interface between the processor module and its peripherals. The purpose of this module is to provide rear panel industry standard connectors that simplify external customer cable requirements.

The P2 passer assembly sends the /O signal and ground from the P2 connector on the chassis backplane at the VMEmodule MPU connection to the MVME712M. The MVME712M routes signals to four serial ports through four industry-standard DB-25 connectors on its front panel. The serial port can be configured for EIA-232-D DTE or DCE via a jumper on the MVME712M.

The MME712M front panel also has an Ethernet port, a SCSI port, and a printer port. In addition, the MVME712M routes the EIA-232-D port 2 signal to an internal modulator.