IS215ACLEH1AB IS200ACLEH1ABA 输入扩展模块

多通道输入： 输入扩展模块通常具有多个输入通道，允许连接多个传感器或信号源。

信号转换： 这些模块通常可以将不同类型的输入信号（如模拟信号或数字信号）转换成可供控制系统处理的标准信号。

隔离： 输入扩展模块通常具有隔离电路，可防止输入信号干扰控制系统或其他信号源。

高精度： 这些模块通常具有高精度的信号测量能力，以确保准确的数据采集。

故障检测： 输入扩展模块通常能够检测输入信号的故障或异常，并在需要时提供警报或反馈。

热插拔支持： 一些模块可能支持热插拔，允许在运行时添加或更改输入设备。

通信接口： 输入扩展模块通常通过标准的通信接口（如以太网、Modbus、Profibus 等）与控制系统通信。

配置和编程： 这些模块通常可以通过配置和编程来适应特定的应用需求。 

IS215ACLEH1AB IS200ACLEH1ABA 输入扩展模块

Multichannel input: Input expansion modules typically have multiple input channels, allowing multiple sensors or signal sources to be connected.

Signal conversion: These modules can usually convert different types of input signals (such as analog or digital signals) into standard signals that can be processed by the control system.

Isolation: The input expansion module usually has an isolation circuit that prevents the input signal from interfering with the control system or other signal sources.

High accuracy: These modules typically have high precision signal measurement capabilities to ensure accurate data acquisition.

Fault detection: Input expansion modules are usually able to detect faults or anomalies in the input signal and provide alerts or feedback if needed.

Hot swap support: Some modules may support hot swap, allowing input devices to be added or changed at run time.

Communication interface: The input expansion module usually communicates with the control system through standard communication interfaces (such as Ethernet, Modbus, Profibus, etc.).

Configuration and programming: These modules can often be configured and programmed to suit specific application needs.