燃机卡IS200PMCIH1ABA系列IS200多功能板卡 DCS系统

燃机卡IS200PMCIH1ABA系列IS200多功能板卡 DCS系统

装电线要连接1203–FB1基座，请从将设备扫描到所需通道。扫描端口电缆为有公对公或公对母两种配置。您可以连接长达10米（33米）的电缆扫描端口设备和任何扫描端口外围设备之间。如果使用端口扩展器，则必须减去电缆长度任何设备和扩展器之间的最大电缆用于连接外围设备的长度。

符合欧盟指令如果本产品具有CE标志，则批准安装在欧盟或欧洲经济区区域内。已经设计好了并经测试符合以下指令。EMC指令本产品经测试符合理事会指令89/336/EEC电磁兼容性EMC）和以下全部或部分标准，记录在技术文档中EN 50081-2 EMC–通用排放标准，第2部分–工业环境EN 50082-2 EMC–通用抗扰度标准，第2部分–工业环境本产品拟用于工业环境。低压指令产品经测试符合理事会指令73/23/EEC低压，采用EN 61131–2的安全要求可编程控制器，第2部分-设备要求和测验。

Wiring To connect to the 1203-FB1 base, scan the device from the desired channel. Scanning port cables can be configured male to male or male to female. You can connect up to 10 meters (33 meters) of cable between Scan port devices and any scan port peripherals. If a port extender is used, the cable length must be subtracted from the length of the maximum cable used to connect peripherals between any device and the extender.

Compliance with EU Directive If this product bears the CE marking, it is approved for installation in the EU or EEA area. It has been designed and tested to comply with the following instructions. EMC Directive This product has been tested to comply with Council Directive 89/336/EEC Electromagnetic Compatibility (EMC) and all or part of the following standards, recorded in the technical documentation EN 50081-2 EMC - General Emission Standard, Part 2- Industrial Environment EN 50082-2 EMC - General Immunity Standard, Part 2 - Industrial Environment This product is intended for use in industrial environments. Low Voltage Directive Products have been tested to comply with Council Directive 73/23/EEC low voltage, using the safety requirements of EN 61131-2 Programmable controllers, Part 2 - Equipment requirements and tests.