GE 通用电气 IS200VAICH1C 具有内部安全监控功能

GE 通用电气 IS200VAICH1C 具有内部安全监控功能

产品介绍：

型 号 ：IS200VAICH1C 优势输出电压：单相220V，三相380V

3．稳压精度：±1％； 4．反应时间：0.04S以内；

5．波型畸变：<0.01％； 6．效 率：98％~99.5％；

7．频 率：50Hz / 60Hz；

8．调压方式：无触点、数码调压、三相分调；

9．绝缘阻抗：＞5MΩ； 10．适用温度：-20℃~＋40℃

智能数控稳压器选用电脑智能控制、精芯片及组控模块主动平衡盯梢处理， 有效地抑制电网的谐波、尖峰电压和噪音搅扰等；使输出电压波形纯粹，安稳值。

智能数控稳压器具有：净化、抗搅扰、过压、欠压、过流、短路及缺持平主动维护的先进功用于一体；

无机械、无碳刷、三相独立分调；

具备了反应时间0.04S以内、空载损耗低于0.5%、有功功率达99%以上、运用寿命长等先进的控制技术，归于先进的绿色环保节能型科技产品。

GE 通用电气 IS200VAICH1C 具有内部安全监控功能

Product Introduction:

Type: IS200VAICH1C Advantages Output voltage: single-phase 220V, three-phase 380V

3. Voltage stability accuracy: ± 1%; 4. Reaction time: within 0.04S;

5. Wave distortion: < 0.01%; 6. Efficiency: 98% ~ 99.5%;

Seven. Frequency: 50Hz / 60Hz;

8. Voltage regulation mode: no contact, digital voltage regulation, three-phase regulation;

9. Insulation impedance: > 5MΩ; 10. Applicable temperature: -20℃~+40℃

Intelligent CNC voltage regulator uses computer intelligent control, fine chip and group control module to actively balance tracking processing, effectively suppress harmonic, peak voltage and noise disturbance in the power grid; Make the output voltage waveform pure, stable value.

Intelligent CNC regulator has: purification, anti-disturbance, over voltage, under voltage, over current, short circuit and lack of active maintenance of advanced work used in one;

No machinery, no carbon brush, three-phase independent dividing;

With the reaction time within 0.04S, no-load loss less than 0.5%, active power up to 99%, long service life and other advanced control technology, belong to the advanced green environmental protection energy-saving technology products.