IS220PAICH1A输出模块GE通用电气

IS220PAICH1A输出模块GE通用电气

产品描述

模拟输入/输出包IS220PAICH1A是为通用电气生产的MarkVI系列而设计的。该包装可用于危险场所。PAIC组件将在27.4VDC的最低电压下工作。(S220PACH1A4型号被描述为模拟输入输出包，已被批准用于危险和非危脸场所。在模型的前面，有四个指标。底部还有一个端口被描述为输入/输出端口。PAIC组件可以使用多个电压,PAIC组件的最小电压为27.4V直流电。

由于6S20PACH1A组件能够在多个位置使用，因此有多种认证与之相关，其中一些位置是危险位置、一级二区IC组、一级二区a、B、C、D组和ATEX二区IC组和非危险位置。以下认证用于ULE207685和UL DEMKO 12 ATEX 1114875X，请考虑到ULE207685认证用于多个位置。

IS220PAICH1A单元可以使用三种型号，即IlS20OSTAIH1A和lS20OSTAIH2A以及IS2O0TBAIH1C型号。所有这些型号都被称为输入输出端子板。PAC输入/输出包的典型位置将位于两个可用IWNE机架之一，即十三或二十一插糟机架。请注意，该单元通常与三模块冗余体系结构系统一起使用。对于TMR系统，有一个单独的控制模块、输入/输出网络和主处理器卡。

Product description

The analog input/output package IS220PAICH1A is designed for the MarkVI series produced by General Electric. The packaging can be used in dangerous places. The PAIC component will operate at a minimum voltage of 27.4VDC. The S220PACH1A4 model is described as an analog input/output package and has been approved for use in hazardous and non-hazardous locations. At the front of the model, there are four metrics. There is also a port on the bottom that is described as an input/output port. The PAIC component can use multiple voltages, the minimum voltage of the PAIC component is 27.4V DC.

Because the 6S20PACH1A component can be used in multiple locations, there are multiple certifications associated with it, some of which are hazardous locations, Level 1 Zone 2 IC groups, Level 1 Zone 2 IC Groups a, B, C, D and ATEX Zone 2 IC groups and non-hazardous locations. The following certifications are for ULE207685 and UL DEMKO 12 ATEX 1114875X, please take into account that the ULE207685 certification is for multiple locations.