IS420UCSBH1A 用于高速应用设计GE模块

IS420UCSBH1A 用于高速应用设计GE模块

IS420UCSBH1A优点

UCSB 控制器具有以下优势：

单模块

内置电源

无需跳线设置

无电池

无风扇

更小的面板占地面积

闪存可以轻松更新

UCSB 控制器安装在面板中，并通过板载 I/O 网络 (IONet) 接口与 I/O 包进行通信。IONet 是一种私有专用以太网，仅支持 Mark 控制 I/O 模块和控制器。

特征

微处理器：：600 MHz Intel EP80579

内存：256 MB DDR2 SDRAM，带纠错码 (ECC)、闪存支持的 SRAM、NAND 闪存大小为 2 GB

操作系统：QNX Neutrino

重量：2.4磅

安装与安装

UCSB 控制器安装在直接连接到面板金属板的单个模块中。

UCSB 控制器应安装在面板上，使垂直气流不受翅片阻碍。 

IS420UCSBH1A 用于高速应用设计GE模块

IS420UCSBH1A Advantages

UCSB controllers have the following advantages:

unimodule

Built-in power supply

No jumper Settings required

battery-free

fanless

Smaller panel footprint

Flash memory can be easily updated

The UCSB controller is mounted in the panel and communicates with the I/O packets via an onboard I/O Network (IONet) interface. IONet is a private Ethernet that supports only Mark control I/O modules and controllers.

trait

Microprocessor: 600 MHz Intel EP80579

Memory: 256 MB DDR2 SDRAM with error correction code (ECC), flash supported SRAM, NAND flash size of 2 GB

Operating System: QNX Neutrino

Weight: 2.4 pounds

Installation and installation

The UCSB controller is installed in a single module directly connected to the panel metal plate.

The UCSB controller shall be mounted on the panel so that vertical airflow is not hindered by fins.

IS420UCSBH1A 用于高速应用设计GE模块