IC200UDD064 GE 具有一个/O高速计数器

IC200UDD064 GE 具有一个/O高速计数器

IC2OOUDD040模块是由GE Fanuc Automation制造的40点Micro Plus PLC模块，是Versamax产品线的一部分。它带有12个ESCP输出，4个DC低电流输出，和24个DC输入。该PLC模块还具有位于左门后面的两个模拟电位计，它们可用于调整模拟寄存器的值。

其他值得注意的功能包括模块正面可移动门背面的DIP开关。对于每个网络，它在一个RS 485串行链路中总共支持8个设备。也有用于增吱支持设备数量的中继器。它还有zui多4个输入和输出扩展模块，可以添加到系统中。GE Fanuc lC20OUDDO4O PLC模块提供了一个先进而强大的处理器，具有9K字的存储器、运动能力、实时时钟、子程序和PID.

GE Fanuc IC2O0OUDD040 40点Micro Plus PLC模块使用24伏DC的电源运行。它还具有一个/O高速计数器，zui大计数领率为100千赫，在100千赫的频率下，占空比为20%至80%的计数器脉冲宽度，计数寄存器为16或32位。当该模块打开时，它自动执行默认参数的配置。它具有支持在定制配置中使用的配置软件。IC2OOUDDO40 PLC模块提供12或24伏DC的负载电压，并且必须安装在垂直表面上。当本设备安装在金属面板上时，应正确接地，以防止融电危险。

IC200UDD064 GE 具有一个/O高速计数器

The IC2OOUDD040 module is a 40-point Micro Plus PLC module manufactured by GE Fanuc Automation as part of the Versamax product line. It comes with 12 ESCP outputs, 4 DC low current outputs, and 24 DC inputs. The PLC module also has two analog potentiometers located behind the left door, which can be used to adjust the value of the analog register.

Other notable features include a DIP switch on the back of a removable door on the front of the module. For each network, it supports a total of eight devices in one RS 485 serial link. Repeaters are also available to increase the number of supported devices. It also has up to 4 more input and output expansion modules that can be added to the system. The GE Fanuc lC20OUDDO4O PLC module provides an advanced and powerful processor with 9K word memory, motion capability, real-time clock, subroutine and PID.

The GE Fanuc IC2O0OUDD040 40-point Micro Plus PLC module operates with a 24 volt DC power supply. It also features a /O high-speed counter with a maximum count rate of 100 KHZ, a duty cycle of 20% to 80% of the counter pulse width at a frequency of 100 KHZ, and a count register of 16 or 32 bits. When the module is turned on, it automatically performs the configuration of the default parameters. It has configuration software that supports use in custom configurations. The IC2OOUDDO40 PLC module provides a load voltage of 12 or 24 volts DC and must be mounted on a vertical surface. When the device is installed on a metal panel, it must be properly grounded to prevent power melting hazards.

IC200UDD064 GE 具有一个/O高速计数器

TRICONEX 3624 Triconex DCS 控制系统模块

TRICONEX 3721 Triconex DCS 模拟量输入卡件

TRICONEX HCU3700/3703E Triconex DCS 模拟量输入端子板

TRICONEX 3636R Triconex DCS 运动控制器

TRICONEX 3625C1 Triconex DCS 模拟量输入模块

TRICONEX 3604E Triconex DCS 全系统备件

TRICONEX 3700A Triconex DCS ITCC控制器

TRICONEX 4210 Triconex DCS 容错控制系统

TRICONEX 3511 Triconex DCS 脉冲输入模块

TRICONEX 3504E Triconex DCS 数字输入模件

TRICONEX 3481 Triconex DCS 控制系统模块

TRICONEX 3301 Triconex DCS 控制系统模块