IC695ETM001-JY 能够通过以太网 控制器连接

IC695ETM001-JY 能够通过以太网 控制器连接

GE Fanuc制造IC695ETM001以太网接口模块，作为RX3i PACSystems系列的一部分。该装置旨在使RX3i PACSystems系列中的控制器能够通过以太网与VersaMax、90-30系列和其他控制器连接。

它具有一个以太网接口，可以以10/100 Mbps的速度工作，并且可以检测速度和所连接电缆的类型。一对长达100米的双绞线用于以10 Mbps的速度连接网络节点。此外，100米长的5类双绞线电缆用于以100 Mbps的速度连接网络节点。IC695ETM001以太网接口具有一个以太网端口，支持使用全双工和半双工节点。此外，直通和交叉以太网电缆都可以用于网络连接。该以太网接口模块支持1个MAC地址和1个IP地址。它配有嵌入式以太网交换机，支持以太网节点的菊花链连接。

GE Fanuc RX3i PAC systems IC 695 ETM 001以太网接口模块的另一个显著特征是RS-232串行端口。IC695ETM001接口模块支持1200 bps至115，200 bps的数据速率。它有一个完整的站管理功能，可通过以太网和串行连接访问，它还提供监督访问。站管理器功能提供的服务包括用于控制和轮询站的命令、密码安全以及对监控日志、配置参数和统计数据的访问。Allen-Bradley IC695ETM001以太网接口模块推荐用于通过SNTP协议同步EGD交换机的时间戳。

IC695ETM001-JY 能够通过以太网 控制器连接

GE Fanuc manufactures the IC695ETM001 Ethernet interface module as part of the RX3i PACSystems family. The device is designed to enable controllers in the RX3i PACSystems family to connect over Ethernet with VersaMax, the 90-30 series and other controllers.

It has an Ethernet interface that can work at 10/100 Mbps and can detect the speed and the type of cable being connected. A pair of twisted pairs up to 100 meters long is used to connect network nodes at 10 Mbps. In addition, 100 meter long Category 5 twisted pair cables are used to connect network nodes at speeds of 100 Mbps. The IC695ETM001 Ethernet interface has an Ethernet port that supports the use of full-duplex and half-duplex nodes. In addition, both direct and cross Ethernet cables can be used for network connectivity. The Ethernet interface module supports one MAC address and one IP address. It comes with an embedded Ethernet switch that supports daisy-chain connectivity of Ethernet nodes.

Another notable feature of the GE Fanuc RX3i PAC systems IC 695 ETM 001 Ethernet interface module is the RS-232 serial port. The IC695ETM001 interface module supports data rates from 1200 bps to 115,200 bps. It has a full station management function that is accessible via Ethernet and serial connections, and it also provides supervised access. The services provided by the station manager feature include commands for controlling and polling stations, password security, and access to monitoring logs, configuration parameters, and statistics. The Allen-Bradley IC695ETM001 Ethernet interface module is recommended for synchronizing the time stamps of EGD switches over the SNTP protocol.

IC695ETM001-JY 能够通过以太网 控制器连接

BENTLY 3500/50-01-00-02 I/O板 Bently Nevada 9200-02-02-10-00

BENTLY 3500/50-01-00-02 备件 Bently Nevada 9200-02-05-10-00

BENTLY 3500/50-01-00-01 数字信号输出模块 Bently Nevada 9200-03-01-10-00

BENTLY 3500/50-01-00-00 伺服控制系统 Bently Nevada 9200-03-02-10-00

BENTLY 3500/50-01-00 伺服控制器 Bently Nevada 9200-03-05-10-00

BENTLY 3500/50 3500/50M 高速计数模块 Bently Nevada 9200-06-01-10-00

BENTLY 3500/50 133388-02 低压驱动器 Bently Nevada 9200-06-02-10-00

BENTLY 3500/50 继电器模组 Bently Nevada 9200-06-05-05-00

BENTLY 3500/46M 电感器 Bently Nevada 9200-01-22-10-00

BENTLY 3500/45 P/N140072-04 通讯模件 Bently Nevada 9200-03-22-10-00

BENTLY 3500/45 176449-04 光电转换器 Bently Nevada 9200-02-01-11-CN