GE DS3800DGRA1F1C 调节器涡轮机控制板 

GE DS3800DGRA1F1C 调节器涡轮机控制板 

产品描述

GE调节器涡轮控制板DS3800DGRA1F1C设计用于安全轻松地安装在驱动器中。该板的每个角都有一个孔，用于使用螺钉进行安装。GE调节器涡轮控制板DS3800DGRA1F1C还装有1个微调电阻器和多个带刻度盘设置的电位器。该板还装有多个电线端子和多个跳线。

如果 GE 调节器涡轮机控制板DS3800DGRA1F1C填充了连接到电线端子的多根跳线，请考虑以下信息。如果可能，最佳做法是使用短线。也就是说，不要使用从板上突出的长线。电线可能会限制电路板上的空气流动。如果可能的话，还要保持电线平放在板上。确保电线牢固地连接到端子上。最佳做法是拉动它们来测试连接。确保电线是适合当前负载的规格。

如果要更换 GE 调节器涡轮机控制板DS3800DGRA1F1C在安装更换板之前需要考虑几个因素。从有缺陷的板上拔下跳线，然后将其安装在更换板上。确保将它们安装在相同的终端之间，并确保连接安全。如果可能，将电线保持在电路板表面上。这将使新鲜空气从驱动器内部带走热量。另一个考虑因素是设置跳线以匹配有缺陷的板上的设置。

GE DS3800DGRA1F1C 调节器涡轮机控制板 

Product description

The GE Regulator turbine control board DS3800DGRA1F1C is designed for safe and easy installation in the drive. Each corner of the plate has a hole for installation using screws. The GE regulator turbine control board DS3800DGRA1F1C also houses a trimmer resistor and multiple potentiometers with dial Settings. The board is also equipped with a plurality of wire terminals and a plurality of jumpers.

If the GE regulator turbine control board DS3800DGRA1F1C is filled with multiple jumpers connected to wire terminals, consider the following information. If possible, the best practice is to use short lines. That is, do not use long lines that protrude from the board. The wires may limit the flow of air on the board. If possible, also keep the wires flat on the board. Make sure the wire is securely connected to the terminal. The best practice is to pull them to test the connection. Make sure the wire is the right size for the current load.

If the GE regulator turbine control board DS3800DGRA1F1C is to be replaced, several factors need to be considered before installing the replacement board. Unplug the jumper from the defective board and then install it on the replacement board. Make sure you install them between the same terminals and make sure the connection is secure. If possible, keep the wires on the board surface. This will allow fresh air to take heat away from the inside of the drive. Another consideration is setting the jumper to match the Settings on the defective board.

GE DS3800DGRA1F1C 调节器涡轮机控制板 

型号推荐

BENTLY 3500/61-01-00 机器人驱动电源 Bently Nevada 200350-10-00-CN

BENTLY 3500/61 机器人轴计算机板 Bently Nevada 200350-12-00-00 

BENTLY 3500/60-01-00 机器人总线卡 Bently Nevada 330400-01-00

BENTLY 3500/60 133811-01D 机器人配件 串口测量板 Bently Nevada 330400-02-CN

BENTLY 3500/60 机器人电源模块 Bently Nevada 330400-01-CN

BENTLY 3500/53PWA-133388-01R 轴计算机板 Bently Nevada 330450-40

BENTLY 3500/53PN133396-01 机器人底板 Bently Nevada 330500-00-00

BENTLY 3500/53M 变频器主控板 Bently Nevada 330500-01-00

BENTLY 3500/53-03-03-00 电流互感器 Bently Nevada 330500-02-CN

BENTLY 3500/53-03-00 低压变频器 Bently Nevada 330500-01-CN

BENTLY 3500/53-01-00 可编程控制器模块 Bently Nevada 330500-03-00

BENTLY 3500/53 PWA-133388-01R 晶闸管模块 Bently Nevada 330500-04-00