六安 GE DS3800HMPG1E1D 模拟转换板 在一端设有模块化连接器

六安 GE DS3800HMPG1E1D 模拟转换板 在一端设有模块化连接器

产品描述

GE 网络控制器板DS3800HMPG1E1D设计用于快速安装在驱动器中。该板的一端有一个模块化连接器，另一端有一个固定杆。GE 网络控制器板DS3800HMPG1E1D还装有 3800 个红色指示灯 LED 和 2 个琥珀色 LED，从主板前面可见。该板还配备了微处理器、可擦除可编程只读存储器 （EPROM） 模块和 1 引脚连接器。

GE 网络控制器板DS3800HMPG1E1D装有 4 个支架，可以连接子卡。子卡为主板提供附加功能。子卡卡在支架上，连接器将子卡连接到主板上。

嵌入在电路板上的微处理器提供用于控制电路板操作的逻辑。微处理器在运行过程中会产生热量，因此需要考虑防止驱动器过热。驱动器必须有冷空气用于冷却。这是一个挑战，因为驱动器通常与其他驱动器和其他功能强大的设备位于一个房间内。当您检查空间时，请注意将安装驱动器的墙壁是否触感过热。如果天气很热，原因可能是墙另一侧的空间很热，或者安装在墙上的设备正在发热。要冷却墙壁，您可以减少房间中安装的驱动器数量。您还可以选择触摸更冷的墙壁来安装驱动器。

六安 GE DS3800HMPG1E1D 模拟转换板 在一端设有模块化连接器

Product description

The GE Network controller board DS3800HMPG1E1D is designed for quick installation in a drive. The board has a modular connector at one end and a fixed rod at the other end. The GE network controller board DS3800HMPG1E1D also has 3800 red indicator leds and 2 amber leds visible from the front of the motherboard. The board is also equipped with a microprocessor, erasable programmable read-only memory (EPROM) module, and a 1-pin connector.

The GE network controller board DS3800HMPG1E1D is equipped with four brackets for connecting subcards. The subcard provides additional functionality to the motherboard. The sub card is on the bracket, and the connector connects the sub card to the motherboard.

A microprocessor embedded on the board provides the logic used to control the board's operation. Microprocessors generate heat during operation, so you need to consider preventing the drive from overheating. The drive must have cold air for cooling. This is a challenge because drives are often located in a room with other drives and other powerful devices. When you check the space, note if the wall on which the drive will be mounted feels overheated. If it is hot, the reason may be that the space on the other side of the wall is hot, or the device installed on the wall is heating up. To cool the walls, you can reduce the number of drives installed in the room. You can also choose to touch a colder wall to install the drive.