合肥 GE DS3800HMPK1L1K 微处理器板 设计用于快速安装在驱动器中

合肥 GE DS3800HMPK1L1K 微处理器板 设计用于快速安装在驱动器中

产品描述

GE微处理器板DS3800HMPK1L1K设计用于快速安装在驱动器中。该板的一端有一个模块化连接器，另一端有一个固定杆。GE微处理器板DS1HMPK3800L1K还装有1个红色指示灯LED和3个琥珀色LED，从板的前面可以看到。该板还配备了微处理器、可擦除可编程只读存储器 （EPROM） 模块和 1 引脚连接器。它还装有 34 个 2 针连接器。

微处理器嵌入在微处理器插座上。可以在电路板上更换微处理器。但是，该过程必须由合格的服务人员执行。有一个工具可用于从电路板上卸下微处理器。安装更换微处理器时，导热膏均匀地落在插座表面上。然后将微处理器与插槽的相应角对齐，并将其压入插槽中。

更换微处理器时，可能还需要安装更新的 EPROM 模块。EPROM模块包含控制微处理器的固件和编程指令。如果微处理器是较新版本，请检查以验证是否需要新的固件和编程代码。

合肥 GE DS3800HMPK1L1K 微处理器板 设计用于快速安装在驱动器中

Product description

The GE microprocessor board DS3800HMPK1L1K is designed for quick installation in a drive. The board has a modular connector at one end and a fixed rod at the other end. The GE microprocessor board DS1HMPK3800L1K also has one red indicator LED and three amber leds, which are visible from the front of the board. The board is also equipped with a microprocessor, erasable programmable read-only memory (EPROM) module, and a 1-pin connector. It also has 34 2-pin connectors.

The microprocessor is embedded in the microprocessor socket. The microprocessor can be replaced on the circuit board. However, the process must be performed by qualified service personnel. There is a tool available for removing the microprocessor from the circuit board. When installing a replacement microprocessor, the thermal paste falls evenly on the surface of the socket. The microprocessor is then aligned with the corresponding corner of the slot and pressed into the slot.

When replacing the microprocessor, you may also need to install a newer EPROM module. The EPROM module contains the firmware and programming instructions that control the microprocessor. If the microprocessor is a newer version, check to verify that new firmware and programming code are required.