DS3800HRCA1D1B 隔离输出接口模块

DS3800HRCA1D1B 隔离输出接口模块

产品描述

该DS3800HRCA1D1B由通用电气（GE）生产，用于Speedtronic Mark IV系列。 电路板沿一侧边缘有一个侧面的深色端子插件.该板可以连接到另一个板或固定到位。要安装，只需使用板上提供的夹子和两个小螺丝。此板上有五个灯泡或 LED，一个是琥珀色，其余为红色。

DS3800HRCA1D1B有两组跳线端口。这些端口具有小电容，可以移动或移除以改变整个电路板的电流。该板上有不同颜色和尺寸的二极管变体。有一个微小的黑色二极管，十九个琥珀色二极管，两个银色二极管，三个钴二极管。还有五个琥珀色电容器和近十五个电阻器。

电容器可以储存能量，而电阻器则帮助传输能量。每个电阻器一次只能处理这么多。体积可以用每个电阻器的彩色标记来计算。大约有<>个EPROM（可以重新编程的数据卡）和四个EEPROM（无法更改的数据卡）。有一个小的升高的黑色部分，如有必要，可以连接另一个EEPROM或EPROM，以及标有“SPARE”的小部分。所有板的识别标记都有助于丝网印刷。

DS3800HRCA1D1B 隔离输出接口模块

Product description

The DS3800HRCA1D1B is manufactured by General Electric (GE) for the Speedtronic Mark IV series. The board has a side dark terminal plug-in along one edge. The board can be attached to another board or fixed in place. To install, simply use the clamp and two small screws provided on the board. There are five bulbs or leds on the board, one amber and the rest red.

The DS3800HRCA1D1B has two sets of jumper ports. These ports have small capacitors that can be moved or removed to change the current throughout the board. There are diode variants in different colors and sizes on the board. There's one tiny black diode, 19 amber diodes, two silver diodes, and three cobalt diodes. There are also five amber capacitors and nearly 15 resistors.

Capacitors store energy, while resistors help transmit it. Each resistor can only handle so much at a time. The volume can be calculated using a color mark for each resistor. There are approximately <> EPROMs (data cards that can be reprogrammed) and four EEPROMs (data cards that cannot be changed). There is a small raised black section that can be connected to another EEPROM or EPROM if necessary, and a small section labeled "SPARE". Identification marks on all plates help screen printing.