DS3800HRDA1C1B是通用电气（GE）的涡轮机控制电路板

DS3800HRDA1C1B是通用电气（GE）的涡轮机控制电路板

产品描述

DS3800HRDA1C1B是通用电气（GE）的涡轮机控制电路板。该DS3800HRDA1C1B是通用电气Mark IV Speedtronic系列的一部分。 该DS3800HRDA1C1B大约有3800个EEPROM和EPROM。EEPROM和EPROM包含DS1HRDA1C3800B顺利运行的所有信息。EEPROM具有固定类型的程序设计，不能更改。但是，EPROM可以根据需要进行修改。有一个标有“SPARE”的段，其中可能连接了另一个EEPROM或EPROM。

有四个黑色外壳，每个外壳覆盖四个红色LED灯。还有两个没有覆盖物的黄色LED。有五个浅蓝色二极管，十八个圆形灰色二极管，超过二十五个绿色二极管，三十五个橙色二极管和五个大的灰色二极管。该板与其他板连接，并具有多个接触点的组合。有两个男性端口。端口的尺寸对比，一个很小，而另一个运行板的范围。还有一个女性端口，与较大的男性端口对面延伸出电路板的范围。连接所有电气线束后要紧固DS1HRDA1C3800B， 所有需要完成的只是添加两个螺钉来固定电路板并将两个塑料夹卡入到位.还有大约八十个电阻器。

电阻器具有不同的颜色铭文，以显示它们可以处理多少功率并帮助在电路板周围传输。每个娇小或大的部分都经过编码和分类，以及通用电气（GE）的徽章和产品编号（DS1HRDA1C<>B）。

DS3800HRDA1C1B是通用电气（GE）的涡轮机控制电路板

Product description

DS3800HRDA1C1B is a turbine control circuit board from General Electric (GE). The DS3800HRDA1C1B is part of the General Electric Mark IV Speedtronic series. The DS3800HRDA1C1B has approximately 3800 EEPROMs and EPROMs. EEPROM and EPROM contain all the information for the smooth operation of DS1HRDA1C3800B. EEPROM has a fixed type of programming that cannot be changed. However, the EPROM can be modified as needed. There is a segment labeled "SPARE" where another EEPROM or EPROM may be connected.

There are four black enclosures, each covered with four red LED lights. And two yellow leds without coverings. There are five light blue diodes, eighteen round gray diodes, more than twenty-five green diodes, thirty-five orange diodes, and five large gray diodes. The plate is connected to other plates and has a combination of multiple contact points. There are two male ports. The size of the port contrasts, with one small while the other runs the range of the board. There is also a female port that extends out of the range of the board opposite the larger male port. Tighten the DS1HRDA1C3800B after connecting all the electrical wiring harnesses, all that needs to be done is to add two screws to secure the board and snap the two plastic clips into place. And about 80 resistors.

The resistors have different color inscriptions to show how much power they can handle and help transmit around the board. Each petite or large section is coded and classified, along with a General Electric (GE) badge and product number (DS1HRDA1C<>B).