DS3800HRMB1N1L 电池ROM板 设计用于快速安装在驱动器中

DS3800HRMB1N1L 电池ROM板 设计用于快速安装在驱动器中

GE电池ROM板DS3800HRMB1N1L设计用于快速安装在驱动器中。该板的一端有一个模块化连接器，另一端有一个固定杆。该板装有 1 个嵌入在板上的 1 针连接器。GE电池ROM板DS40HRMB3800N1L装有1个复位拨动开关。该板还装有 1 个跳线和 7 个 1 针连接器。模数转换器是嵌入在电路板上的组件。它将模拟信号转换为数字格式。数字格式用于整个驱动器的信号处理。

直流到直流稳压器是电路板上一个大而重的元件。它会产生热量，因此在安装电路板时需要特别注意。始终用两只手抬起电路板并将电路板定位在驱动器中。确保主板牢固地安装在主板机架中。主板通过固定杆锁定在机架中。确保它们完全接合，并且电路板不会在电路板机架中移动。

确保驱动器安装在阴凉干燥的位置。确保空气中没有过多的灰尘和污垢。这将有助于防止直流到直流稳压器过热，并使驱动器保持在推荐的温度范围内。如果温度超出范围，则超温跳闸情况可以自动关闭驱动器。请确保在打开驱动器电源之前解决问题。检查以确保通风口没有黑光。

DS3800HRMB1N1L 电池ROM板 设计用于快速安装在驱动器中

The GE battery ROM board DS3800HRMB1N1L is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The board is equipped with a 1-pin connector that is embedded in the board. GE battery ROM board DS40HRMB3800N1L is equipped with a reset toggle switch. The board is also equipped with 1 jumper and 7 1-pin connectors. An analog-to-digital converter is a component embedded on a circuit board. It converts analog signals into a digital format. The digital format is used for signal processing throughout the drive.

A DC to DC voltage regulator is a large and heavy component on a circuit board. It generates heat, so special attention is needed when installing the circuit board. Always lift the board with two hands and position the board in the driver. Make sure the motherboard is securely installed in the motherboard rack. The motherboard is locked in the frame with a retaining rod. Make sure they are fully engaged and that the board does not move in the board rack.

Make sure the drive is installed in a cool, dry location. Make sure there is not too much dust and dirt in the air. This will help prevent the DC-to-DC regulator from overheating and keep the drive within the recommended temperature range. If the temperature is out of range, the overtemperature trip situation can automatically shut down the drive. Be sure to resolve the issue before powering on the drive. Check to make sure there is no black light in the vent.