GE DS3800HRRA1C1 涡轮调节器电路板 有效运行

GE DS3800HRRA1C1 涡轮调节器电路板 有效运行

产品描述

GE继电器输出板DS3800HRRA1C1设计用于快速安装在驱动器中。该板的一端有一个模块化连接器，另一端有一个固定杆。该板装有 1 个红色指示灯 LED 和 8 个复位拨动开关。模数转换器是嵌入在电路板上的组件。它将模拟信号转换为数字格式。数字格式用于整个驱动器的信号处理。GE 继电器输出板DS1HRRA3800C1还装有 1 个琥珀色指示灯 LED。

GE继电器输出板DS3800HRRA1C1安装在驱动器中，在服务人员或技术人员可以安全地维修板或更换板之前，必须进行多次安全检查。在开始任务之前，服务人员必须检查驱动器周围的地板是否有水分。如果地板有水分，它会导电并引起触电。为防止这种情况发生，请擦干地板上的所有水分。如果存在水坑，请确保地板完全干燥。如果水分是反复出现的情况，请考虑在房间内放置除湿机以干燥空气，这将减少冷凝。

如果地板上覆盖着油或油脂，最佳做法是清洁地板。使用清洁剂清洁地板，在地板清洁干燥之前不要继续。如果发生紧急情况，光滑的地板可能会阻止防止严重伤害的快速行动。

GE DS3800HRRA1C1 涡轮调节器电路板 有效运行

Product description

The GE relay output board DS3800HRRA1C1 is designed for quick installation in the drive. The board has a modular connector at one end and a fixed rod at the other end. The board is equipped with a red indicator LED and 8 reset toggle switches. An analog-to-digital converter is a component embedded on a circuit board. It converts analog signals into a digital format. The digital format is used for signal processing throughout the drive. The GE relay output board DS1HRRA3800C1 is also equipped with an amber indicator LED.

The GE relay output board DS3800HRRA1C1 is installed in the drive and must undergo several safety checks before the board can be safely serviced or replaced by service personnel or technicians. Before starting the task, the service personnel must check the floor around the drive for moisture. If there is moisture in the floor, it will conduct electricity and cause an electric shock. To prevent this from happening, dry all moisture from the floor. If there are puddles, make sure the floor is completely dry. If moisture is a recurring situation, consider placing a dehumidifier in the room to dry the air, which will reduce condensation.

If the floor is covered with oil or grease, the best practice is to clean the floor. Use a cleaner to clean the floor and do not continue until the floor is clean and dry. If an emergency occurs, a smooth floor may prevent quick action to prevent serious injury.