DS3800HS0D1J1G 控制器模块

DS3800HS0D1J1G 控制器模块

GE Dom Plus伺服放大器板DS3800HSAA1T1L的一端有一个模块化连接器，另一端有固定杆。板上装有一个散热器。模拟/数字转换器是一个嵌入在电路板上的组件。GE Dom Plus伺服放大器板DS3800HS0D1J1G还配有1个34针连接器和1个用于电可擦除可编程只读存储器（EEPROM）模块的插座。该板还装有3个微调电阻器。

GE Dom Plus伺服放大器板DS3800HS0D1J1G上的1个组件周围有一个散热器。当组件产生热量时，散热器的设计目的是通过吸收热量来保持组件的凉爽。自由流动的空气经过散热器，带走多余的热量。散热器的性能要求是保持恒定的空气供应。驱动器的功能是将冷空气吸入驱动器底部的通风口。空气被部件加热并继续上升，直到从顶部的通风口离开驱动器。如果带状电缆阻塞了通风口，驱动器可能会过热，因为它们会阻塞空气。

另一个考虑因素是安装驱动器的房间太热。如果房间里有太多其他产生热量的设备，就会发生这种情况。为了解决这个问题，可以在设备上安装通风罩，以排出多余的热量。风帽还可以带走灰尘、污垢和油，以保持房间清洁，这有助于驱动操作。

DS3800HS0D1J1G 控制器模块

The GE Dom Plus servo amplifier board DS3800HSAA1T1L has a modular connector at one end and a fixed rod at the other end. The board is fitted with a radiator. An analog/digital converter is a component that is embedded on a circuit board. The GE Dom Plus servo amplifier board DS3800HS0D1J1G also comes with a 34-pin connector and a socket for an electrically erasable Programmable read-only memory (EEPROM) module. The board is also equipped with three trimmer resistors.

The GE Dom Plus servo amplifier board DS3800HS0D1J1G has a heat sink around one of the components. When the components generate heat, the radiator is designed to keep the components cool by absorbing heat. Free-flowing air passes through the radiator, taking away excess heat. The performance requirement of the radiator is to maintain a constant air supply. The function of the drive is to draw cold air into the vents at the bottom of the drive. The air is heated by the component and continues to rise until it leaves the drive through a vent at the top. If the ribbon cables block the vents, the drive may overheat because they block the air.

Another consideration is that the room in which the drive is installed is too hot. This can happen if there are too many other heat-generating devices in the room. To solve this problem, a ventilation hood can be installed on the equipment to expel excess heat. The cowl also removes dust, dirt and oil to keep the room clean, which helps drive the operation.