GE DS3800HSAA1U1N 伺服放大器板 模拟/数字转换器是电路板上的组件

GE DS3800HSAA1U1N 伺服放大器板 模拟/数字转换器是电路板上的组件

产品描述

GE Dom Plus 伺服放大器板DS3800HSAA1U1N一端采用模块化连接器，另一端配有固定杆。电路板装有散热器。模数转换器是嵌入在电路板上的组件。GE Dom Plus 伺服放大器板DS1HSAA3800U1N还配有 1 个 1 针连接器和 34 个插座，用于电可擦除可编程只读存储器 （EEPROM） 模块。该板还装有 1 个微调电阻器。

GE Dom Plus 伺服放大器板DS3800HSAA1U1N上的 EEPROM 插座在将更换板运送到现场时为空。可以选择使用模块上存储的现有固件和编程代码安装模块。这将导致更换板处理与有缺陷的板相同的信息。但是，如果您认为电路板出现问题是由固件错误引起的，则可以选择不使用相同的固件和编程代码。相反，您可以使用最新版本的代码。

固件和代码在电路板的使用寿命内更新。报告代码错误时，修补程序将包含在代码中。代码中添加了新功能以及其他改进。您可以擦除存储在模块上的代码并加载最新代码。这可能会解决您遇到的与代码相关的问题。

GE DS3800HSAA1U1N 伺服放大器板 模拟/数字转换器是电路板上的组件

Product description

The GE Dom Plus servo amplifier board DS3800HSAA1U1N has a modular connector at one end and a fixed rod at the other end. The circuit board is fitted with a radiator. An analog-to-digital converter is a component embedded on a circuit board. The GE Dom Plus servo amplifier board DS1HSAA3800U1N is also equipped with a 1-pin connector and 34 sockets for electrically erasable programmable read-only memory (EEPROM) modules. The board is also equipped with a trimmer resistor.

The EEPROM socket on the GE Dom Plus servo amplifier board DS3800HSAA1U1N was empty when the replacement board was shipped to the field. You can optionally install the module using existing firmware and programming code stored on the module. This will cause the replacement board to process the same information as the defective board. However, if you believe that the problem with the board is caused by a firmware error, you can choose not to use the same firmware and programming code. Instead, you can use the latest version of the code.

Firmware and code are updated over the life of the board. When code errors are reported, patches are included in the code. New features and other improvements have been added to the code. You can erase the code stored on the module and load the latest code. This may solve any problems you have with your code.