— 产品中心 —
邮箱:A3669372910@163.com
手机:17359299796
电话:17359299796
地址:福建省漳州市龙文区朝阳北路1号办公楼205室
DS3800HUMB 通用内存板 安装在驱动器中而设计品牌GE加工定制否输入范围电压:-10伏至+10伏电流:4至20毫安准确性校准电压范围峰值信号输入必须在+13和- 13伏之间灵敏度70 dB CMRR转化率约每2.4毫秒至2.8毫秒(最大)响应时间100弧度/秒(0.01秒)输入保护从VME背板隔离的输入连续过电压输入在共模或正常模式120vac或125vdc可售卖地全国DS3800HUMB
产品详情
产品描述
GE 通用内存板DS3800HUMB专为快速安装在驱动器中而设计。该板的一端有一个模块化连接器,另一端有一个固定杆。GE 通用内存板DS1HUMB还配备了 3800 个复位拨动开关和 1 个红色指示灯 LED。该板还装有多个可擦除可编程只读存储器 (EPROM) 模块和 1 个跳线。
GE通用内存板DS3800HUMB的功能区域分为4个部门。这些部门被称为四边形。四方 A、四方 B、四方 C 和四方 D 是分区的 ID。每个分区还填充了一组跳线,用于配置四边形的处理。每个四边形还装有单针连接器。
四通道 D 有 4 个 EPROM 模块插座。插座旨在使模块的安装易于执行。模块在使用前必须存放在防静电袋中。模块很容易被静电损坏。静电会干扰存储在模块上的代码,并使电路板上的组件无法读取代码。从包中取出模块之前,请佩戴腕带。腕带的一端固定在手腕上。另一端被夹在工作区附近的金属物体上。这可以是椅腿、工作台或工作台。金属物体用作地面,静电将其寻找并从模块或您的人中排出。这使得模块可以安全触摸。
Product description
The GE universal memory board DS3800HUMB is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The GE universal memory board DS1HUMB is also equipped with 3,800 reset toggle switches and a red indicator LED. The board is also equipped with multiple erasable programmable read-only memory (EPROM) modules and a jumper.
The function area of the GE universal memory board DS3800HUMB is divided into four divisions. These departments are called quadrangles. Quad A, Quad B, Quad C, and Quad D are partition ids. Each partition is also populated with a set of jumpers that configure the handling of the quadrilateral. Each quadrilateral is also fitted with a single pin connector.
Four-channel D has 4 EPROM module sockets. The socket is designed to make the installation of the module easy to perform. The module must be stored in an ESD bag before use. The module is easily damaged by static electricity. Static electricity interferes with the code stored on the module and makes the code unreadable to the components on the board. Wear a wristband before removing the module from the bag. One end of the wristband is attached to the wrist. The other end is clipped to a metal object near the work area. This can be a chair leg, a bench, or a work table. The metal object is used as the ground, and static electricity will seek it out and expel it from the module or your person. This makes the module safe to touch.
相关推荐