— 产品中心 —
邮箱:A3669372910@163.com
手机:17359299796
电话:17359299796
地址:福建省漳州市龙文区朝阳北路1号办公楼205室
GE DS3800NADA1F1F 电机驱动控制板品牌GE加工定制否10/100BaseT(X)端口5/8/24/4/4100Base-FX 端口2光纤模式MM - 多模 SS- 单模以太网标准IEEE 802.3: 10Base-TMAC Table1024/2048处理方式储存和转发输入电源冗余是功率消耗(典型值)3 瓦-9.6 瓦电流过载保护是反极性保护是可售卖地全国GE DS3800NA
产品详情
GE DS3800NADA1F1F 电机驱动控制板
GE DS3800NADA1F1F 电机驱动控制板
产品描述
DS3800NADA1F1F是通用电气的PCB,设计用作Speedtronic Mark IV系统中的模数转换器卡。用于燃气轮机和蒸汽轮机控制的Mark IV采用集成芯片组和有意冗余设计,即使一个PCB遇到电子问题,也有助于保持系统运行。Mark IV 可用于对涡轮机系统及其辅助设备进行排序,并可以创建全自动启动、关闭和冷却程序。
该DS3800NADA1F1F设计有3个集成电路,包括U12的模数转换器芯片。该芯片提供三种数据输出格式选择:单个并行 8 位字;两个 3800 位字节或串行数据。标准控制输入和快速总线访问时间确保与微处理器和数字信号处理器的轻松接口。该DS1NADA1F<>F还内置振荡器、双正边沿触发D触发器和上/下二进制计数器。
DS3800NADA1F1F有一个琥珀色 LED 和三个 TP 测试点,位于右边缘。它内置了两个提取夹,以及三个由阳极氧化铝制成的 PCB 加固横杆,以加强电路板。DS3800NADA1F1F的每个角落都经过工厂钻孔。
DS3800NADA1F1F可以通过公头和母头连接器与其他 PCB 通信。它们位于电路板的两端。DS3800NADA1F1F有两个电位计和两条备用电镀通孔线。
GE DS3800NADA1F1F 电机驱动控制板
Product description
The DS3800NADA1F1F is a General Electric PCB designed to be used as an analog-to-digital converter card in the Speedtronic Mark IV system. The Mark IV for gas turbine and steam turbine control features an integrated chipset and intentional redundancy design that helps keep the system running even if one PCB experiences electronic problems. The Mark IV can be used to sequence turbine systems and their auxiliary equipment, and can create fully automatic start-up, shutdown, and cooling procedures.
The DS3800NADA1F1F design has 3 integrated circuits, including a U12 analog-to-digital converter chip. The chip offers three data output formats: a single parallel 8-bit word; Two 3800 bit bytes or serial data. Standard control inputs and fast bus access times ensure easy interface with microprocessors and digital signal processors. The DS1NADA1F<>F also has a built-in oscillator, a double-positive edge-triggered D flip-flop and an up/down binary counter.
The DS3800NADA1F1F has an amber LED and three TP test points, located on the right edge. It has two extraction clips built in, as well as three PCB-reinforced crossbars made of anodized aluminum to strengthen the board. Every corner of the DS3800NADA1F1F is drilled through the factory.
The DS3800NADA1F1F can communicate with other PCBS through male and female connectors. They are located at both ends of the board. The DS3800NADA1F1F has two potentiometers and two spare electroplating through hole wires.
相关推荐