DS380ONAIE1A1A GE 印刷电路板

DS380ONAIE1A1A GE 印刷电路板

DS38O0NBIB1K1F是一款桥接接口电路板。它是作为Speedtronic Mark IV涡轮控制系列的一部分生产的。DS3800NBIB1K1F是由通用电气公司为该系列制造的。

DS380ONBIBK1F共有18个集成电路。这些集成电路在电路板上占据了很大空间，并标有字母DS380ONBIB1K1F周围有许多蓝色、银色和红色的电容。这些电容标有字母c，许多电阻位于DS3800NBIB1K1F上，具有不同的色带。这些电阻可以用字母r来标识，每个电阻上的带代表器件的电阻能力。DS3800NBIB1K1F在卡的上部有一个橙色LED，也称为发光二极管。该二极管标有首字母CR，称为CR5。

电路板周围的所有其他二极管都不发光。这些二极管也标有首字母CR。在电路板上边缘的一条线上有22个测试点，标有首字母TP。DS380ONBIB1K1F具有一对电阻网络，可通过缩写RN识别，如RN1和RN2。

DS3800NBIB1K1F底部附近有一个连接器端口。使用此端口，可以将额外的板或额外的部件连接到卡上.

DS380ONAIE1A1A GE 印刷电路板

The DS38O0NBIB1K1F is a bridge interface circuit board. It is produced as part of the Speedtronic Mark IV turbine control series. The DS3800NBIB1K1F was manufactured by General Electric for the series.

The DS380ONBIBK1F has 18 integrated circuits. These ics take up a lot of space on the circuit board and are marked with the letters DS380ONBIB1K1F surrounded by many blue, silver and red capacitors. These capacitors are marked with the letter c and many resistors are located on DS3800NBIB1K1F with different color bands. These resistors can be identified by the letter R. The band on each resistor represents the resistive capability of the device. The DS3800NBIB1K1F has an orange LED, also known as a light-emitting diode, on the upper part of the card. The diode is marked with the initial CR and is called CR5.

All the other diodes around the board do not emit light. These diodes are also labeled with the initial CR. There are 22 test points in a line on the edge of the board, marked with the initials TP. The DS380ONBIB1K1F has a pair of resistance networks that can be identified by the abbreviations RN, such as RN1 and RN2.

The DS3800NBIB1K1F has a connector port near the bottom. Using this port, additional boards or additional parts can be attached to the card.