DS3800NCBA1A1B驱动器 模拟

DS3800NCBA1A1B驱动器 模拟

DS3800NCBA1A1B驱动器 模拟

DS3800NCBA1A1B是用于涡轮机控制的组件板。这部分是由通用电气公司制造的。DS3800NCBA1A1B是Speedtronic Mark ⅣV涡轮控制系列的一部分。从第一个Mark l系统开始，Speedtronic Mark系统已经被用于数十年的高级涡轮机控制。

DS300NCBA1A1B在电路板右侧具有八8)个蓝色电位计。电位计也称为可变电阻器。它们可以用来调整元件的电阻。这些电位计标有从RH1到RH8的参考代号RH。电位计旁边写着“安装极性带”。DS3800NCBA1A1B包含四十七(47)个电容器，这些电容器都标有数字。字母A到贴在DS380ONCBA1A1B的顶部边缘。

DS3800NCBA1A1B在电路板顶部附近有两个电阻。这些电阻分成带状，表示每个电阻的电阻容量。电阻器标有参考代号R，如R20和R21。

DS38O0NCBA1A1B具有一个跨越电路板左边缘的连接器端口。使用此端口，可以将附加器件或电路板连接到

DS380ONCBA1A1B。港口旁边是十(10)到八十(80)乘十的数字。DS3800NCBA1A1B上写满了字母A到z。

DS3800NCBA1A1B驱动器 模拟

DS3800NCBA1A1B is a component board for turbine control. This part is manufactured by General Electric. The DS3800NCBA1A1B is part of the Speedtronic Mark IV V turbine control family. Since the first Mark l system, Speedtronic Mark systems have been used for decades for advanced turbine control.

The DS300NCBA1A1B has eight 8) blue potentiometers on the right side of the board. Potentiometers are also called variable resistors. They can be used to adjust the resistance of components. These potentiometers are labeled with the reference code RH from RH1 to RH8. It says "Install polarity tape" next to the potentiometer. The DS3800NCBA1A1B contains forty-seven (47) capacitors, all of which are marked with numbers. Letter A to attach top edge of DS380ONCBA1A1B.

The DS3800NCBA1A1B has two resistors near the top of the board. These resistors are divided into bands that represent the resistance capacity of each resistor. Resistors are marked with reference codes R, such as R20 and R21.

The DS38O0NCBA1A1B has a connector port that spans the left edge of the board. Using this port, additional devices or circuit boards can be connected to

DS380ONCBA1A1B. Next to the port are the numbers ten (10) to eighty (80) times ten. DS3800NCBA1A1B is filled with letters A through z.