General Electric DS3800NEPB1C1B 印刷电路板

General Electric DS3800NEPB1C1B 印刷电路板

General Electric DS3800NEPB1C1B 印刷电路板

产品描述

GE功率励磁板DS3800NEPB1C1B只有在连接到GE Mark IV印刷电路板时才能运行。该板必须连接到电机励磁板。

根据电路板执行的工作，电路板由两个散热器之一构建。如果应用正在反转，则板上安装一个散热器型号。如果应用不可反转，则在电路板上安装不同的散热器。散热器旨在从一个或多个组件中吸取热量，以防止电路板过热。

DS3800NEPB1C1B板安装在电源转换模块中，安装板时必须考虑一些注意事项。确保电路板按照规格安装在模块中。也就是说，确保电路板周围有空间，以允许电路板产生的热量离开模块。模块中的所有组件都会产生热量，过热情况可能会导致模块关闭或运行不可靠。

如果热量无法保持在室温或指定的工作温度内，则可能需要安装风扇或强制通风。这可能包括通风罩或空气冷却系统。

General Electric DS3800NEPB1C1B 印刷电路板

Product description

The GE power exciter DS3800NEPB1C1B operates only when connected to a GE Mark IV printed circuit board. The board must be connected to the motor exciter board.

Depending on the work performed by the board, the board is built from one of two heat sinks. If the application is being reversed, mount a radiator model on the board. If the application is not reversible, install a different heat sink on the board. The heat sink is designed to draw heat from one or more components to prevent the board from overheating.

The DS3800NEPB1C1B board is installed in a power conversion module. Precautions must be taken when installing the board. Make sure the circuit board is installed in the module according to the specifications. That is, make sure there is space around the board to allow the heat generated by the board to leave the module. All components in the module generate heat, and overheating conditions may cause the module to shut down or operate unreliably.

If the heat cannot be kept at room temperature or the specified operating temperature, a fan or forced ventilation may be required. This may include ventilation hoods or air cooling systems.