DS3800NEPB1C1C板的电源是电机励磁板

DS3800NEPB1C1C板的电源是电机励磁板

DS3800NEPB1C1C板的电源是电机励磁板

产品描述

GE功率励磁板DS3800NEPB1C1C只有在连接到GE Mark IVPC板时才能运行。该板必须连接到电机励磁板。

DS3800NEPB1C1C板的电源是电机励磁板，也安装在模块中。电路板之间的电源连接位于三个位置。在P5上，最大值为350mA。在P15上，最大值为150mA。而在N15上，最大值为120mA。这是DS3800NEPB1C1C和电机励磁板的组合额定功率。

如果需要测试电路板并且您怀疑存在问题，则有两个测试点。您可以测试电枢电流输出和励磁电流输出。

如果主板似乎有缺陷并且您无法找到问题的原因，则驱动器还具有诊断工具。使用驱动器上的控制面板启动诊断工具。诊断程序可从可在显示屏上查看的菜单启动。使用键滚动菜单项并选择诊断程序。诊断提供了组件的详细说明。你可能希望将诊断报告下载到笔记本电脑或其他设备。

您可以从控制面板控制驱动器和电源转换模块的行为。您可以使用钥匙停止驱动器，并命令电机反向或正向行驶。

DS3800NEPB1C1C板的电源是电机励磁板

Product description

The GE power excitation board DS3800NEPB1C1C runs only when it is connected to the GE Mark IVPC board. The board must be connected to the motor exciter board.

The power supply for the DS3800NEPB1C1C board is the motor excitation board, also installed in the module. The power connections between the boards are located in three locations. On P5, the maximum value is 350mA. On the P15, the maximum is 150mA. On the N15, the maximum is 120mA. This is the combined power rating of DS3800NEPB1C1C and the motor exciter board.

If you need to test the board and you suspect a problem, there are two test points. You can test the armature current output and the excitation current output.

If the motherboard seems defective and you can't find the cause of the problem, the drive also has a diagnostic tool. Use the control panel on your drive to launch the diagnostic tool. The diagnostics can be launched from a menu that can be viewed on the display. Use the keys to scroll through the menu items and select Diagnostics. Diagnostics provide a detailed description of the components. You may want to download the diagnostic report to your laptop or other device.

You can control the behavior of the drive and power conversion module from the control panel. You can use the key to stop the drive and command the motor to go in reverse or forward.