DS3800NEPB1D1D GE 电机励磁板

DS3800NEPB1D1D GE 电机励磁板

DS3800NEPB1D1D GE 电机励磁板

产品描述

GE功率励磁板DS3800NEPB1D1D只有在安装在功率控制模块中时才能运行。该板必须连接到电机励磁板。DS3800NEPB1D1D为操作员提供了控制电路板的方法。操作员可以选择关闭、曲柄、怠速、手动、自动和远程。这是通过操作选择器控件实现的。操作员还可以降低或提高速度。

从 0 次方实现全功率大约需要 5 微秒。该板的电源源自电机励磁板。电机励磁板产生的电力用于DS3800NEPB1D1D和电机励磁板。

电源转换模块连接到驱动器，因此安装在相同的环境中，具有相同的环境要求。确保该区域的温度在为设备提供的规格范围内。如果温度太热，则可能存在过热情况，导致驱动器和模块关闭。使用风扇将空气移到热组件上以冷却设备。您可能需要安装通风罩才能将热空气排出该区域。

另一个考虑因素是环境中的空气质量。过多的灰尘、污垢、油漆喷雾或空气中的化学物质可能会损坏组件。如果是这种情况，请首先尝试通过将设备安装在远离有害环境的地方来限制设备的暴露。经常清洁设备以限制暴露。

DS3800NEPB1D1D GE 电机励磁板

Product description

The GE power exciter DS3800NEPB1D1D operates only when installed in the power control module. The board must be connected to the motor exciter board. The DS3800NEPB1D1D provides the operator with a way to control the circuit board. The operator can choose from off, crank, idle, manual, automatic, and remote. This is done by manipulating the selector control. The operator can also reduce or increase the speed.

Achieving full power from the zero power takes about 5 microseconds. The board's power supply is derived from the motor excitation board. The electric power generated by the motor exciter board is used for DS3800NEPB1D1D and the motor exciter board.

The power conversion module is connected to the driver and therefore installed in the same environment with the same environmental requirements. Ensure that the temperature of the area is within the specifications provided for the equipment. If the temperature is too hot, there may be an overheating condition, causing the drive and module to shut down. A fan is used to move air over the thermal assembly to cool the device. You may need to install a ventilation hood to get hot air out of the area.

Another consideration is the air quality in the environment. Too much dust, dirt, paint spray, or chemicals in the air may damage the components. If this is the case, try first to limit your device's exposure by installing it away from harmful environments. Clean equipment frequently to limit exposure.