DS3800NEPD1G1D GE 励磁电源板

DS3800NEPD1G1D GE 励磁电源板

DS3800NEPD1G1D GE 励磁电源板

产品描述

GE励磁电源板DS3800NEPD1G1D的每个角都有一个孔，您可以通过该孔插入螺钉以固定板。该板装有多个电容器。该板装有2个ADI公司的电源元件。GE励磁电源板DS3800NEPD1G1D还装有1个琥珀色指示灯LED。该板还具有 1 个 34 针连接器和多个电线端子，用于将电线和组件连接到电路。该板还装有 5 个微调电阻器。

GE 励磁电源板 DS3800NEPD1G1D 中的琥珀色指示灯 LED 被分配了一个 ID。ID是IMOK，在板上丝印。驱动器运行时，操作员可以看到 LED。LED 位于电路板边缘附近，因此，如果在其周围安装了其他电路板，琥珀色 LED 仍然可见。当 LED 熄灭且驱动器接收电流时，主板发生错误。

首先检查以确保电路板安装正确且电路板中存在电流。您可以使用测试设备检查电源。但是，由于电路板中存在高压电流，只有合格的服务商才能在有电源的情况下使用电路板上的测试设备。

DS3800NEPD1G1D GE 励磁电源板

Product description

The GE excitation power board DS3800NEPD1G1D has a hole in each corner through which you can insert screws to secure the board. The plate is equipped with a plurality of capacitors. The board is equipped with two ADI power components. The GE excitation power board DS3800NEPD1G1D also has an amber indicator LED. The board also features a 34-pin connector and multiple wire terminals for connecting wires and components to the circuit. The board is also equipped with five trimmer resistors.

The amber indicator LED in the GE excitation power board DS3800NEPD1G1D is assigned an ID. The ID is IMOK, silkscreen printed on the board. When the driver is running, the operator can see the LED. The LED is located near the edge of the board, so if other boards are installed around it, the amber LED is still visible. When the LED goes out and the driver receives current, the motherboard has an error.

Check first to make sure the board is installed correctly and that there is current in the board. You can use test equipment to check the power supply. However, due to the high voltage current present in the circuit board, only qualified service providers can use the test equipment on the circuit board with a power supply.