DS3800NEPD1H1E 具有 1 个 34 针连接器和多个电线端子

DS3800NEPD1H1E 具有 1 个 34 针连接器和多个电线端子

DS3800NEPD1H1E 具有 1 个 34 针连接器和多个电线端子

产品描述

GE励磁电源板DS3800NEPD1H1E的每个角都有一个孔，您可以通过该孔插入螺钉以固定板。该板装有多个电容器。该板装有2个ADI公司的电源元件。GE励磁电源板DS3800NEPD1H1E还装有1个琥珀色指示灯LED。该板还具有 1 个 34 针连接器和多个电线端子，用于将电线和组件连接到电路。该板还装有 5 个微调电阻器。

GE励磁电源板DS3800NEPD1H1E装有4个高压电容器，这些电容器可能会对未接受过如何安全处理电路板培训的个人造成严重电击或烧伤。驱动器由高压电力供电。有些源是交流电流，有些是直流电流。直流电流使用整流器从交流电流转换而来。驱动器使用各种源为电机和其他运动部件供电。一些直流电流用于为电路板供电和处理控制信号。电容器在正常处理期间存储高压直流电流。电流在正常处理过程中释放，循环重复多次，无需操作员干预。

当驱动器断电时，电容器可能仍会保留电流，这可能会损害接触电路板的个人。高压电流在几秒钟后从电容器中消散。考虑到这一点，从驱动器中移除交流和直流电流后，请等待 30 秒，然后再开始任何维修过程。

DS3800NEPD1H1E 具有 1 个 34 针连接器和多个电线端子

Product description

The GE excitation power board DS3800NEPD1H1E has a hole at each corner through which you can insert screws to secure the board. The plate is equipped with a plurality of capacitors. The board is equipped with two ADI power components. The GE excitation power board DS3800NEPD1H1E also has an amber indicator LED. The board also features a 34-pin connector and multiple wire terminals for connecting wires and components to the circuit. The board is also equipped with five trimmer resistors.

The GE excitation power board DS3800NEPD1H1E is packed with four high-voltage capacitors that can cause severe electric shocks or burns to individuals who are not trained in how to safely handle the board. The drive is powered by high voltage electricity. Some sources are AC current, some are DC current. The DC current is converted from the AC current using a rectifier. The drive uses a variety of sources to power the motor and other moving parts. Some DC current is used to power the board and process control signals. Capacitors store high voltage DC current during normal processing. The current is released during normal processing and the cycle is repeated many times without operator intervention.

When the drive is powered off, the capacitor may still retain current, which can harm individuals who touch the board. The high voltage current dissipates from the capacitor after a few seconds. With this in mind, after removing AC and DC current from the drive, wait 30 seconds before starting any repair process.