GE DS3800NFCD1K1E 点火电路板

GE DS3800NFCD1K1E 点火电路板

GE DS3800NFCD1K1E 点火电路板

产品描述

GE烧制电路板DS3800NFCD1K1E在每个角落都有1个孔，用于用螺钉将电路板连接到驱动器内部。该板装有 4 个支架，用于连接子卡。子卡提供额外的处理、连接器和功能。该板装有多个晶体管-晶体管逻辑器件。GE点火电路板DS3800NFCD1K1E还装有13个红色指示灯LED和1个琥珀色指示灯LED。该板还具有 1 个用于电可擦除可编程只读存储器 （EEPROM） 模块的插座。该板还装有多个跳线和 2 个 34 针连接器。

GE烧制电路板DS3800NFCD1K1E装有3个28针母连接器。连接器设计用于连接到安装在主板上方的女儿卡。子卡的背面有一个匹配的连接器。将子卡按到主板上时，将连接 28 针连接器。

28 针连接器承载为卡供电的电压。连接器还携带卡接收的控制信号进行处理。其他控制信号从卡发送到电路板。1 个子卡还装有 10 针带状电缆。带状电缆的一端永久连接到卡上，另一端端接在 10 针连接器中。将带状电缆上的连接器插入GE燃烧电路板DS3800NFCD1K1E上的连接器。仅当主板断开电源并从驱动器上卸下时，才断开或连接 10 针带状电缆。

GE DS3800NFCD1K1E 点火电路板

Product description

The GE fired circuit board DS3800NFCD1K1E has 1 hole in each corner for attaching the board to the inside of the driver with screws. The board is equipped with four brackets for connecting subcards. Subcards provide additional processing, connectors, and functionality. The board is equipped with a plurality of transistor-transistor logic devices. The GE ignition circuit board DS3800NFCD1K1E also has 13 red indicator leds and 1 amber indicator LED. The board also has a socket for an electrically erasable programmable read-only memory (EEPROM) module. The board is also equipped with multiple jumpers and two 34-pin connectors.

The GE fired circuit board DS3800NFCD1K1E is equipped with three 28-pin female connectors. The connector is designed to connect to the daughter card mounted above the motherboard. The back of the sub-card has a matching connector. When the subcard is pressed to the motherboard, the 28-pin connector is connected.

The 28-pin connector carries the voltage that powers the card. The connector also carries the control signal received by the card for processing. Other control signals are sent from the card to the circuit board. The 1 sub-card is also equipped with a 10-pin ribbon cable. One end of the ribbon cable is permanently attached to the card and the other end is terminated in a 10-pin connector. Plug the connector on the ribbon cable into the connector on the GE combustion circuit board DS3800NFCD1K1E. Disconnect or connect the 10-pin ribbon cable only when the motherboard is disconnected from the power supply and removed from the drive.