DS3800NFCD1N1E 板装有 4 个支架，用于连接子卡

DS3800NFCD1N1E 板装有 4 个支架，用于连接子卡

DS3800NFCD1N1E 板装有 4 个支架，用于连接子卡

产品描述

GE烧制电路板DS3800NFCD1N1E在每个角落都有1个孔，用于用螺钉将电路板连接到驱动器内部。该板装有 4 个支架，用于连接子卡。子卡提供额外的处理、连接器和功能。该板装有多个晶体管-晶体管逻辑器件。GE点火电路板DS3800NFCD1N1E还装有13个红色指示灯LED和1个琥珀色指示灯LED。该板还具有 1 个用于电可擦除可编程只读存储器 （EEPROM） 模块的插座。该板还装有多个跳线和 2 个 34 针连接器。

GE烧成电路板DS3800NFCD1N1E也装满了测试点。训练有素的服务人员拥有适当的设备，可以使用测试点来测试电路板上的电路。使用测试设备是必要的。必须为此目的配置测试设备。此外，连接到设备的探头必须与设备兼容。它们还必须处于良好的工作状态并且没有磨损的绝缘材料。

所有测试点都分配有 ID。ID 以 TP 为前缀，后跟一个数字。TP21、TP22 和 TP23 都是分配给测试点的 ID 示例。电路板随附的服务信息描述了测试点的使用。仅在从驱动器中卸下主板时测试主板。必须将电路板从电压中移除，并放置在平坦、坚固和干净的表面上。用两只手握住电路板，不要触摸组件。

DS3800NFCD1N1E 板装有 4 个支架，用于连接子卡

Product description

The GE fired circuit board DS3800NFCD1N1E has 1 hole in each corner for attaching the board to the inside of the driver with screws. The board is equipped with four brackets for connecting subcards. Subcards provide additional processing, connectors, and functionality. The board is equipped with a plurality of transistor-transistor logic devices. The GE ignition circuit board DS3800NFCD1N1E also has 13 red indicator leds and 1 amber indicator LED. The board also has a socket for an electrically erasable programmable read-only memory (EEPROM) module. The board is also equipped with multiple jumpers and two 34-pin connectors.

The GE fired circuit board DS3800NFCD1N1E is also filled with test sites. Trained service personnel have the proper equipment to use test points to test the circuit on the board. The use of test equipment is necessary. Test equipment must be configured for this purpose. In addition, the probe connected to the device must be compatible with the device. They must also be in good working order and free of worn insulation.

All test points are assigned ids. The ID is prefixed with TP and followed by a number. TP21, TP22, and TP23 are all examples of ids assigned to test points. The service information accompanying the board describes the use of the test point. Test the motherboard only when removing it from the drive. The circuit board must be removed from the voltage and placed on a flat, sturdy, and clean surface. Hold the board with two hands and do not touch the components.