DS3800NFCD1Q1H用于用螺钉将电路板连接到驱动器

DS3800NFCD1Q1H用于用螺钉将电路板连接到驱动器

DS3800NFCD1Q1H用于用螺钉将电路板连接到驱动器

产品描述

GE烧制电路板DS3800NFCD1Q1H每个角都有1个孔，用于用螺钉将电路板连接到驱动器内部。该板装有 4 个支架，用于连接子卡。子卡提供额外的处理、连接器和功能。

该板装有多个晶体管-晶体管逻辑器件。GE点火电路板DS3800NFCD1Q1H还装有13个红色指示灯LED和1个琥珀色指示灯LED。该板还具有 1 个用于电可擦除可编程只读存储器 （EEPROM） 模块的插座。该板还装有多个跳线和 2 个 34 针连接器。

由于GE烧毁电路板DS3800NFCD1Q1H可以安装子卡，因此该板的重量可能比驱动器中安装的大多数板更大。因此，安装电路板时必须小心。移动电路板时使用 2 只手，在搬运电路板时切勿触摸组件。您可能会意外弯曲或折断组件。相反，将手放在侧面边缘。将主板放置在驱动器中时，可以清楚地看到驱动器内部。然后，用一只手将螺丝插入板上的孔中，另一只手转动螺丝刀。对其他1颗螺钉重复此操作。

DS3800NFCD1Q1H用于用螺钉将电路板连接到驱动器

Product description

The GE fired circuit board DS3800NFCD1Q1H has a hole in each corner for attaching the board to the inside of the driver with screws. The board is equipped with four brackets for connecting subcards. Subcards provide additional processing, connectors, and functionality.

The board is equipped with a plurality of transistor-transistor logic devices. The GE ignition circuit board DS3800NFCD1Q1H also has 13 red indicator leds and 1 amber indicator LED. The board also has a socket for an electrically erasable programmable read-only memory (EEPROM) module. The board is also equipped with multiple jumpers and two 34-pin connectors.

Because the GE burned out board DS3800NFCD1Q1H can be fitted with a subcard, the board may weigh more than most boards installed in the drive. Therefore, care must be taken when installing the circuit board. Use two hands when moving the circuit board. Do not touch the component when moving the circuit board. You may accidentally bend or break components. Instead, place your hand on the side edge. When the motherboard is placed in the drive, the inside of the drive can be clearly seen. Then, insert the screw into the hole in the board with one hand and turn the screwdriver with the other. Repeat for the other screw.