DS3800NFCF1C1B GE 烧制电路板

DS3800NFCF1C1B GE 烧制电路板

DS3800NFCF1C1B GE 烧制电路板

产品描述

GE制造了DS3800NFCF1C1B PCB作为Speedtronic / Mark IV系列的组件。Mark IV专为蒸汽和燃气轮机管理而设计，可以自动化大多数程序，包括停机和启动以及冷却。它还使涡轮机系统在安全参数范围内运行。

DS3800NFCF1C1B被设计为烧制电路板。它的所有角落都经过工厂钻孔，并沿一个边缘进行了对齐标记。它可以接受辅助板 （DS3800DFCF，），安装后可以访问其他组件（五个跳线开关和三个电流表）。辅助装置通过 <> 个引脚连接到主板，将其锁定到位。

该DS3800NFCF1C1B由四十二个集成电路组成。 这包括 4 位上/下计数器和负边沿触发触发器。它有二十一个晶体管、二十九个测试点、十五个 LED（一个琥珀色、十四个红色）和两个跳线开关。跳线允许对电路板进行一些定制。电路板的左下角有两个插入开关。这些被标记为“休息”和步骤。

DS3800NFCF1C1B有三个连接器，用于与其他 PCB 通信.这包括一个 10 针公头（直针）垂直连接器以及两个 218A4637-P4 0027 连接器。后者沿一条短边放置。

DS3800NFCF1C1B GE 烧制电路板

Product description

GE manufactures the DS3800NFCF1C1B PCB as a component of the Speedtronic/Mark IV series. Designed for steam and gas turbine management, the Mark IV automates most procedures, including shutdown and start-up, and cooling. It also enables the turbine system to operate within safe parameters.

The DS3800NFCF1C1B is designed for firing circuit boards. All corners of it have been drilled through the factory and lined up along one edge. It can accept the auxiliary board (DS3800DFCF,) and after installation can access the other components (five jumper switches and three ammeters). The auxiliary is connected to the motherboard via <> pins, locking it in place.

The DS3800NFCF1C1B is composed of forty-two integrated circuits. This includes a 4-bit up/down counter and a negative edge trigger trigger. It has twenty-one transistors, twenty-nine test points, fifteen leds (one amber, fourteen red), and two jumper switches. Jumpers allow for some customization of the board. There are two insert switches in the lower left corner of the board. These are labeled "breaks" and steps.

The DS3800NFCF1C1B has three connectors for communication with other PCBS. This includes a 10-pin male (straight pin) vertical connector as well as two 218A4677-P40027 connectors. The latter is placed along a short edge.