DS3800NFCF1E1C是一种印刷电路板，设计为Mark IV系列的点火板

DS3800NFCF1E1C是一种印刷电路板，设计为Mark IV系列的点火板

DS3800NFCF1E1C是一种印刷电路板，设计为Mark IV系列的点火板

产品描述

DS3800NFCF1E1C是一种印刷电路板，设计为Mark IV系列的点火板。该系列旨在管理燃气轮机/蒸汽轮机系统，可以自动化启动和关闭等过程，并可以防止涡轮机系统在不安全的条件下运行。Mark IV 还可用于空气、水和燃料排放监测。

DS3800NFCF1E1C已钻孔以进行安装。它被标记为沿其顶部边缘对齐。它标记为“66A07”。DS3800NFCF1E1C接受辅助板DS3800DFCF。安装此板时，可以访问额外的组件，包括跳线和电流表。DS3800DFCF通过板对板连接器引脚固定到位。

DS3800NFCF1E1C有 <> 个 LED，包括 <> 个琥珀色 LED 和 <> 个红色 LED。它有两个插入开关和一个十针垂直连接器。这些组件都位于电路板的左侧。

DS3800NFCF1E1C有两个 218A4637-P4 0027 连接器。它有二十一个晶体管和二十九个测试点。所有这些组件都已标记。

DS3800NFCF1E1C有四十二个集成电路。这包括晶体振荡器、触发器、上/下二进制计数器和 8 位静态 MOS RAM 芯片。该DS3800NFCF1E1C由不同值的电阻器、电容器和二极管构成。

DS3800NFCF1E1C是一种印刷电路板，设计为Mark IV系列的点火板

Product description

The DS3800NFCF1E1C is a printed circuit board designed for the Mark IV series ignition board. Designed to manage gas turbine/steam turbine systems, the series can automate processes such as start-up and shutdown and can prevent turbine systems from operating under unsafe conditions. Mark IV can also be used for air, water and fuel emissions monitoring.

The DS3800NFCF1E1C has been drilled for installation. It is labeled aligned along its top edge. It's labeled "66A07." The DS3800NFCF1E1C accepts the auxiliary board DS3800DFCF. When installing this board, you can access additional components, including jumpers and ammeters. The DS3800DFCF is secured in place with board-to-board connector pins.

The DS3800NFCF1E1C has <> leds, including <> amber leds and <> red leds. It has two insert switches and a ten-pin vertical connector. These components are located on the left side of the board.

The DS3800NFCF1E1C has two 218A4637-P40027 connectors. It has twenty-one transistors and twenty-nine test points. All of these components are labeled.

The DS3800NFCF1E1C has forty-two integrated circuits. This includes crystal oscillators, flip-flops, up/down binary counters, and 8-bit static MOS RAM chips. The DS3800NFCF1E1C is composed of resistors, capacitors and diodes of different values.