531X126SNDACG1是通用电气的缓冲卡

531X126SNDACG1是通用电气的缓冲卡

531X126SNDACG1是通用电气的缓冲卡

产品描述

531X126SNDACG1是通用电气的缓冲卡。531X126SNDACG1 有 531 个金属片，垂直分布在整个电路板上。126X1SNDACG531 有 126 套公端子，带有白色塑料底座和背衬。每个公端子由四个细金属插脚组成。这些公端子允许将 1X531SNDACG126 连接到周围的电路板上。

1X531SNDACG126有一个黑色小方形晶体管。晶体管是一种用于切换或放大电功率或电子信号的半导体器件。晶体管可以通过它们与电路板的三个连接点来识别.1X531SNDACG126 有 1 个黑色长电阻器，每个电阻器的侧面都印有白色电阻器方程。531X126SNDACG1 还具有六个大的银色电阻器，电阻器公式印在侧面。

银电阻器非常大，它们被拉链绑在电路板上。电阻器是一种无源双端子电气元件，将电阻作为电路元件实现。在电子电路中，电阻器以多种方式使用，例如减少电流、调整信号电平、分压、偏置有源元件和端接传输线等。零件编号（1X<>SNDACG<>）板的类型（SNUBBER CARD）和制造商徽标（通用电气）都印在电路板的表面上，以及+SV-<>。

531X126SNDACG1是通用电气的缓冲卡

Product description

The 531X126SNDACG1 is a General Electric buffer card. The 531X126SNDACG1 has 531 metal pieces that are vertically distributed throughout the board. The 126X1SNDACG531 has 126 sets of male terminals with a white plastic base and backing. Each male terminal consists of four thin metal pins. These male terminals allow the 1X531SNDACG126 to be connected to the surrounding circuit board.

The 1X531SNDACG126 has a small black square transistor. A transistor is a semiconductor device used to switch or amplify electrical power or electronic signals. The transistors can be identified by their three connection points to the circuit board. The 1X531SNDACG126 has 1 long black resistor with white resistor equations printed on the side of each resistor. The 531X126SNDACG1 also features six large silver resistors with the resistor formula printed on the side.

The silver resistors are very large, and they are zipped to the circuit board. A resistor is a passive double-terminal electrical element that implements a resistor as a circuit element. In electronic circuits, resistors are used in a variety of ways, such as reducing current, adjusting signal levels, dividing voltage, biasing active components, and terminating transmission lines. The part number (1X<>SNDACG<>) the type of board (SNUBBER CARD) and the manufacturer's logo (GE) are printed on the surface of the board, as well as +SV-<>.