531X125SNHAAG1 是一款通用电气缓冲板

531X125SNHAAG1 是一款通用电气缓冲板

531X125SNHAAG1 是一款通用电气缓冲板

产品描述

531X125SNHAAG1 是一款通用电气缓冲板。这是一个小， 非常简单的电路板，只有几个安装的组件.像这样的缓冲板用于DC300和AC300驱动系统等GE系统中，以提供短期电流路径来抑制瞬态电压，并防止这些短期电压尖峰对继电器或开关造成损坏。

531X125SNHAAG1 是 AX Control 库存中可用的几块缓冲板之一。由于这些电路板中的许多彼此非常相似，因此请务必为您的特定应用订购正确的组件。该板包括一个J1跳线器、一个大轴向电容器、一个较小的电容器、一个二极管和一个电阻器。否则，电路板有两个工厂钻孔，这些孔已用位于电路板中心的导电材料环住。

531X125SNHAAG1 是一款通用电气缓冲板

Product description

The 531X125SNHAAG1 is a General Electric buffer board. It is a small, very simple circuit board with only a few mounted components. Buffer boards like these are used in GE systems such as DC300 and AC300 drive systems to provide short-term current paths to suppress transient voltages and prevent these short-term voltage spikes from causing damage to relays or switches.

The 531X125SNHAAG1 is one of several buffer boards available in AX Control's inventory. Since many of these boards are very similar to each other, it is important to order the right components for your specific application. The board consists of a J1 jumper, a large axial capacitor, a smaller capacitor, a diode, and a resistor. Otherwise, the board has two factory holes that have been ringed with conductive material located in the center of the board.