531X124MSDAJG2 GE 处理器模块

531X124MSDAJG2  GE 处理器模块

531X124MSDAJG2  GE 处理器模块

产品描述

531X124MSDAJG2是GE制造的小型电路板组件，适用于DC-300等通用驱动系统。

531X124MSDAJG2 是一款 MFC 抑制板。 这只是该板的几个版本之一。531X124MSDAJG2 是一款小型矩形板，具有多个切口和钻孔。板的中心有四个圆形切口，用导电材料环住;这些都标记为AF，DW，DZ和KF。还有两个额外的圆形切口和一个长方形切口。这些标记为DX，DY和GF。

531X124MSDAJG2 具有三个金属氧化物压敏电阻。MOV用于使用电压钳位来防止瞬态浪涌的过压保护，就像齐纳二极管一样。该板有四个卡入式连接器，位于板的顶部边缘。这些标记为 K1 到 K4。该板具有一个双针接头连接器和两个端子针连接器。端子引脚连接器位于左下角。

531X124MSDAJG2 上的其他组件包括两个电容器，每个电容器都有一个拉链领带，用于增加对电路板的支撑和连接。 它有两个绕线电阻器。还有四个金属膜电阻器。该板只有一个变压器。该组件使用表面布线连接到电路板上的各种其他组件。

531X124MSDAJG2  GE 处理器模块

Product description

The 531X124MSDAJG2 is a small circuit board assembly manufactured by GE for use in general-purpose drive systems such as the DC-300.

The 531X124MSDAJG2 is an MFC suppressor board. This is just one of several versions of the board. The 531X124MSDAJG2 is a small rectangular board with multiple cuts and holes. There are four circular cuts in the center of the plate, which are surrounded by conductive materials; These are labeled AF, DW, DZ, and KF. There are also two additional round cuts and one rectangular cut. These are labeled DX, DY and GF.

The 531X124MSDAJG2 has three metal oxide varistors. MOV is used for overvoltage protection that uses voltage clamping to prevent transient surges, just like Zener diodes. The board has four snap-in connectors located on the top edge of the board. These are labeled K1 through K4. The board has a double pin connector and two terminal pin connectors. The terminal pin connector is located in the lower left corner.

Other components on the 531X124MSDAJG2 include two capacitors, each with a zipper tie for increased support and connection to the board. It has two winding resistors. And four metal film resistors. The board has only one transformer. This component uses surface wiring to connect to various other components on the board.