GE 531X122PCNAEG1 模拟电压源输出模块 自动化机械备件

GE 531X122PCNAEG1 模拟电压源输出模块 自动化机械备件

GE 531X122PCNAEG1 模拟电压源输出模块 自动化机械备件

产品描述

GE电源连接板531X122PCNAEG1是多个原始设备电源连接板的更新部件。 信号电缆和电源线连接到 531X122PCNAEG1 板，当您关闭电路板时，您必须将电缆连接到正确的连接器，并且在此过程中不要损坏任何电缆。

记下电路板上电缆连接到的连接器标识符，并将信息附加到电缆上。这提供了在更新板上连接电缆的位置的记录。如果更换板是同一板的较新版本，则出厂时可能已更改连接器的位置，但这并不意味着板不兼容或在驱动器中的行为不同。兼容性在新主板中设计和测试。该主板在所有更换的驱动器中都经过测试，因此您可以将其视为重复的主板。

将新板从保护袋中拉出，仅握住其边缘，以防止损坏组件。然后小心地握住连接器上的一根电缆，并从旧板上拉出。然后，将其直接推入新板上的匹配连接器。

打开将主板固定在驱动器中的所有锁定卡舌，然后小心地卸下有缺陷的主板。保持新板的水平并定位自己以清楚地看到板。在不接触驱动器中的任何其他主板或物体的情况下，插入主板。

GE 531X122PCNAEG1 模拟电压源输出模块 自动化机械备件

Product description

The GE power connector 531X122PCNAEG1 is an update to multiple original device power connectors. The signal cable and power cord are connected to the 531X122PCNAEG1 board, and when you close the board, you must connect the cable to the correct connector, and do not damage any cables in the process.

Note the connector identifier on the board to which the cable is connected and attach the information to the cable. This provides a record of where the cable is connected on the update board. If the replacement board is a newer version of the same board, the position of the connector may have been changed at the factory, but this does not mean that the board is incompatible or behaves differently in the drive. Compatibility is designed and tested in new motherboards. The motherboard is tested on all replacement drives, so you can treat it as a duplicate motherboard.

Pull the new board out of the protective bag and hold only its edges to prevent damage to the components. Then carefully hold one of the cables on the connector and pull it out from the old board. Then, push it directly into the matching connector on the new board.

Open all locking latches that hold the motherboard in the drive, then carefully remove the defective motherboard. Keep the new board level and position yourself to see the board clearly. Insert the motherboard without touching any other motherboard or object in the drive.