GE通用电气531X121PCRAKG1dcs卡件模块电源连接卡

GE通用电气531X121PCRAKG1dcs卡件模块电源连接卡

GE通用电气531X121PCRAKG1dcs卡件模块电源连接卡

产品描述

GE电源连接板531X121PCRAKG1是多个原始设备电源连接板的更新部件。 531X121PCRAKG1 板旨在替代多种不同的电源连接板，这些板提供各种电压。G1 和 G4 电压范围为 190 伏至 500 伏。G2 电压范围从 350 伏到 700 伏。G3 电压范围为 50 至 240 伏。为了达到驱动器所需的特定电压，531X121PCRAKG1 板提供了几个跳线，您可以设置这些跳线来模拟驱动器中要更换的原始板中的电压。

主板随附的手册提供了将驱动器与要使用的跳线设置进行交叉参考所需的信息。正确设置跳线以避免损坏驱动器组件至关重要。该板有两个跳线，每个跳线有七个引脚。根据驱动器的不同，您可以将跳线放置在不同的引脚集上，以实现正确的电压。

有关简短的示例，将 JP1 放在引脚 P3 和 P8 上，并将 JP2 跳线插入引脚 P6 和 P9，使 G1 和 G4 电压为 190、G2 电压为 350 和 G3 电压为 50。阅读并遵循续订板随附的手册中的信息，了解硬盘所需的结果。

GE通用电气531X121PCRAKG1dcs卡件模块电源连接卡

Product description

The GE power connector 531X121PCRAKG1 is an updated part of several original device power connectors. The 531X121PCRAKG1 board is designed to replace a number of different power connection boards that offer a variety of voltages. The G1 and G4 range from 190 to 500 volts. G2 voltage range from 350 volts to 700 volts. G3 voltage range is 50 to 240 volts. To reach the specific voltage required by the drive, the 531X121PCRAKG1 board comes with several jumpers that you can set to simulate the voltage in the original board in the drive that you want to replace.

The manual that comes with the motherboard provides the information you need to cross-reference the drive with the jumper Settings you want to use. It is essential to set the jumper correctly to avoid damaging the driver assembly. The board has two jumpers, each with seven pins. Depending on the driver, you can place the jumper on different pin sets to achieve the correct voltage.

For a short example, put JP1 on pins P3 and P8 and insert JP2 jumpers into pins P6 and P9 so that G1 and G4 voltage is 190, G2 voltage is 350, and G3 voltage is 50. Read and follow the information in the manual that came with the renewal board to understand the results required for your hard drive.