531X121PCRAGG1 GE直流电枢电压

531X121PCRAGG1 GE直流电枢电压

531X121PCRAGG1 GE直流电枢电压

产品描述

GE电源连接板531X121PCRAGG1是多个原始设备电源连接板的更新部件。 531X121PCRAGG1 板可替代多个电源连接板，这些板对直流电枢电压范围具有不同的规格。该板使用两个跳线，您必须设置这两个跳线来配置该板以用于您的特定电源连接板。板上有 7 个引脚和两个跳线。您可以将跳线安装在各种组合上，以获得不同的电枢电压范围。531X121PCRAGG1 板附带了查找有缺陷的板和设置跳线以提供正确电压所需的信息。

打开装有板子的纸箱，您会发现板子装在保护性塑料袋中。在将电路板从盒子里拿出来之前，有一些简单的准则。始终将电路板从边缘抬起，因为这可以保护电路板顶部的组件。切勿在主板顶部施加压力，以保护连接器、引脚和其他组件不被弯曲、折断或以其他方式损坏。

在您准备好安装主板之前，保护袋必须保持在原位，事实上，在您准备好将其插入驱动器之前，最好不要将保护袋从纸箱中取出。触摸电路板时请佩戴接地带，以防止静电积聚。表带必须连接到裸露的金属表面以排出静电。

531X121PCRAGG1 GE直流电枢电压

Product description

The GE power connector 531X121PCRAGG1 is an updated part of multiple original device power connectors. The 531X121PCRAGG1 board can replace multiple power connection boards with different specifications for the DC armature voltage range. The board uses two jumpers that you must set to configure the board for your specific power connection board. There are seven pins and two jumpers on the board. You can mount jumpers on a variety of combinations to get different armature voltage ranges. The 531X121PCRAGG1 board comes with the information needed to find defective boards and set jumpers to provide the correct voltage.

Open the carton containing the board and you will find the board in a protective plastic bag. Before taking the board out of the box, there are some simple guidelines. Always lift the board away from the edges, as this protects the components on top of the board. Never apply pressure to the top of the motherboard to protect connectors, pins, and other components from being bent, broken, or otherwise damaged.

The protective bag must remain in place until you are ready to install the motherboard, and in fact it is best not to remove the protective bag from the carton until you are ready to insert it into the drive. Wear a strap when touching the circuit board to prevent static electricity accumulation. The strap must be attached to a bare metal surface to discharge static electricity.