531X121PCRACG1 GE 电源连接板

531X121PCRACG1 GE 电源连接板

531X121PCRACG1 GE 电源连接板

产品描述

GE电源连接板531X121PCRACG1是多个原始设备电源连接板的更新部件。 531X121PCRACG1 包含跳线，您必须在安装电路板之前设置这些跳线，以匹配驱动器运行所需的电压。该板包含两个跳线，您必须将其插入引脚上才能为驱动器产生特定的电压。用手指或尖嘴钳插入跳线。不要将跳线放在板上，并确保跳线已牢固插入。如果跳线在驱动器内丢失，则必须找到跳线并安装它们，然后再启动驱动器。

如果未正确设置跳线，可能会损坏驱动器组件，或者不正确的电压可能导致驱动器运行不可靠。将跳线插入引脚时要小心，不要弯曲引脚或触摸板上的其他组件。不要用力将跳线越过引脚。

531X121PCRACG1 板装在密封的容器中，以防止篡改。在打开包装盒之前，找到包装盒上的标签，然后检查型号、所有序列号和所有识别信息。寻找箱子处理不当或液体溅到箱子上的证据。

531X121PCRACG1 GE 电源连接板

Product description

The GE power connector 531X121PCRACG1 is an updated part of multiple original device power connectors. The 531X121PCRACG1 contains jumpers that you must set before installing the board to match the voltage required for the drive to operate. The board contains two jumpers that you must plug into the pins to generate a specific voltage for the driver. Insert the jumper with your fingers or needle-nose pliers. Do not place the jumper on the board and ensure that the jumper is firmly inserted. If the jumpers are lost inside the drive, you must find them and install them before starting the drive.

If the jumper is not set correctly, it may damage the driver assembly, or an incorrect voltage may cause the driver to operate unreliably. Be careful when inserting the jumper into the pin not to bend the pin or other components on the touchpad. Do not force the jumper over the pin.

The 531X121PCRACG1 board is packaged in a sealed container to prevent tampering. Before opening the box, find the label on the box, then check the model number, all serial numbers, and all identifying information. Look for evidence of improper handling of the case or liquid spills on the case.