General Electric 531X111PSHASG3 电机励磁控制及电源板

General Electric 531X111PSHASG3 电机励磁控制及电源板

General Electric 531X111PSHASG3 电机励磁控制及电源板

产品描述

531X111PSHASG3是一款电机场控制和电源板。它是通用电气 531X 系列替换板的成员。该卡可以安装在GE品牌的许多驱动器和励磁器中。驱动器所需的电源由此卡提供。它还可以为器件的集成电机场电路供电。对此卡进行了不同的修订，从而产生了不同的电路板配置。此卡是 G3 修订版，所有连接到交流线路的 MOV 都安装在外部。

电源板是驱动系统的组成部分。此卡可产生三种不同的电源，额定电压为 5 VDC、15 VDC 和 24 VDC。电机场电路由 531X111PSHASG3 板的集成脉冲变压器供电。卡上还集成了三个继电器。这些包括 RUN 或 K1、MAX 或 K2，以及 FAULT 或 K3。还包括三个电位计，允许用户调整和校准电路和电流反馈。五个可配置跳线还允许用户调整电流和反馈信号。

用户应满足有关电路板安装的参数。遵循这些将降低设备损坏主板和驱动器的风险。531X111PSHASG3 只能由经过培训以安装这些类型的驱动板的合格人员操作。

General Electric 531X111PSHASG3 电机励磁控制及电源板

Product description

The 531X111PSHASG3 is an electric field control and power board. It is a member of the General Electric 531X series replacement boards. The card can be installed in many GE branded drives and exciters. The power required for the drive is provided by this card. It can also power the integrated electric field circuit of the device. Different revisions were made to the card, resulting in different board configurations. This card is a G3 revision and all MOV connected to the AC line is installed externally.

The power supply board is an integral part of the drive system. The card can produce three different power supplies rated at 5 VDC, 15 VDC, and 24 VDC. The electric field circuit is powered by an integrated pulse transformer on the 531X111PSHASG3 board. Three relays are also integrated into the card. These include RUN or K1, MAX or K2, and FAULT or K3. Three potentiometers are also included, allowing users to adjust and calibrate circuits and current feedback. Five configurable jumpers also allow the user to adjust the current and feedback signals.

The user shall meet the parameters for board mounting. Following these will reduce the risk of your device damaging the motherboard and drive. The 531X111PSHASG3 should only be operated by qualified personnel trained to install these types of driver boards.